Obiettivo Scale is a perennial cause of defects on rolled products, either directly or as a result of persistent ghost marks. This project builds on previous work to determine optimum processing conditions for special steels (notably ferritic and austenitic stainless steels, micro-alloy strip steels and plate grades), by characterising furnace scale, residual scale after hydraulic de-scaling and scale present after primary rolling.A simplified empirical scale growth model will facilitate interpolation between different steel types and furnace atmospheres. An FE model of scale growth and deformation will predict scale development during reheating, de-scaling and rolling. The model work will be tested against laboratory and pilot plant trials. Programma(i) ECSC-COAL-STEEL-RTD C - Research Programme of the Research Fund for Coal and Steel Argomento(i) Data not available Invito a presentare proposte Data not available Meccanismo di finanziamento Data not available Coordinatore CORUS UK LTD Contributo UE Nessun dato Indirizzo 30 Millbank LONDON Regno Unito Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato Partecipanti (4) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto BETRIEBSFORSCHUNGSINSTITUT VDEH-INSTITUT FUR ANGEWANDTE FORSCHUNG GMBH Germania Contributo UE Nessun dato Indirizzo Sohnstrasse 65 40237 DUSSELDORF Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato CENTRO SVILUPPO MATERIALI SPA Italia Contributo UE Nessun dato Indirizzo Via di Castel Romano 100/102 ROMA Mostra sulla mappa Costo totale Nessun dato MEFOS- METALLURGICAL RESEARCH INSTITUTE AB Svezia Contributo UE Nessun dato Indirizzo 97125 LULEA Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato UNIVERSITY OF OULU Finlandia Contributo UE Nessun dato Indirizzo Pentti Kaiterankatu 1 90014 OULU Mostra sulla mappa Collegamenti Sito web Opens in new window Costo totale Nessun dato