Skip to main content
European Commission logo
English English
CORDIS - EU research results
CORDIS
CORDIS Web 30th anniversary CORDIS Web 30th anniversary

FLExible Dimethyl ether production from biomass Gasification with sorption-enhancED processes

Objective

The FLEDGED project will deliver a process for Bio-based dimethyl Ether (DME) production from biomass. The FLEDGED project will combine a flexible sorption enhanced gasification (SEG) process and a novel sorption enhanced DME synthesis (SEDMES) process to produce DME from biomass with an efficient and low cost process.

The primary aim of FLEDGED project is to develop a highly intensified and flexible process for DME production from biomass and validate it in industrially relevant environments. This objective will be accomplished by:
- Experimental validation of the flexible SEG process at TRL5;
- Experimental validation of the flexible SEDMES process at TRL5;
- Evaluation of the full biofuel production chain from energy, environmental, economic, socio-economic and risk point of view;
- Preparation of the ground for future exploitation of the results of the project beyond FLEDGED, by including in the consortium industrial partners along the whole biofuel production chain.

By combining the SEG and the SEDMES processes, the FLEDGED project will validate a plant concept that:
- is characterized by a tremendous process intensification: sorption of CO2 in the gasifier and of water in the DME reactor allows designing an overall process for DME production with only two fundamental steps and with reduced units for syngas conditioning
- allows operating with a wide range of biomass feedstocks
- will be more efficient than competitive processes and expected to have a lower cost, thanks to the reduced number of components, the avoidance or significant reduction of recycles and the avoidance of energy consuming and costly air separation and CO2 separation units
- is capable of producing syngas with tailored composition by adapting the SEG process parameters, which allows coupling with an electrolysis system for converting excess intermittent renewable electricity into a high value liquid fuel

Call for proposal

H2020-LCE-2016-2017

See other projects for this call

Sub call

H2020-LCE-2016-RES-CCS-RIA

Coordinator

POLITECNICO DI MILANO
Net EU contribution
€ 757 125,00
Address
PIAZZA LEONARDO DA VINCI 32
20133 Milano
Italy

See on map

Region
Nord-Ovest Lombardia Milano
Activity type
Higher or Secondary Education Establishments
Links
Total cost
€ 770 625,00

Participants (10)