Tracking the chemicals hiding in your tap water
Is your water free from chemical by-products? Disinfection is essential to make water safe to drink, but when the disinfectant – usually chlorine – reacts with organic matter in water, it can form disinfection by-products (DBPs). Some of these compounds carry potential health risks that are not yet fully understood. To shed light on these compounds, the EU-funded H2OforAll(opens in new window) project investigated their sources, spread, toxicity and environmental impact to help protect the drinking water chain. “More than 700 DBPs have been identified worldwide, while current regulations cover only a small number of them,” says project coordinator Rui C. Martins. “One of the important findings of H2OforAll is that some of the most toxic DBPs are not necessarily those currently regulated.” Climate change, through drought and human-caused contamination, is further degrading drinking water sources, requiring more chlorine to prevent disease. That, in turn, increases DBP production.
Seeing what is in the water
Through H2OforAll, new insights and technologies help fill the DBP knowledge gap and support their monitoring, management and regulation across Europe. The project developed two advanced infrared sensing systems capable of detecting 15 different DBPs at microgram-per-litre concentrations, enabling near real-time monitoring in the field. In addition, the team built an integrated infrastructure combining DBP sensors with auxiliary sensors that measure water quality parameters such as pH, temperature, dissolved oxygen and organic matter. The H2OforAll project deployed this infrastructure in the drinking water network of Coimbra. The infrared sensors detected and quantified several DBP families, including trihalomethanes and haloacetic acids. “This demonstrated that advanced monitoring of DBPs is no longer limited to analysis in the laboratory, but can be implemented directly in water networks,” adds Martins. The data feeds predictive models that estimate DBP formation hotspots across the network. This led to DBPFinder, an open-source tool that helps water utilities identify optimal sensor locations, cutting monitoring costs and optimising chlorination. The project also created a digital platform(opens in new window) integrating monitoring data, geospatial information, modelling outputs and other insights for researchers, water utilities, citizens and policymakers.
Treating water while trapping risk
The H2OforAll project developed treatment technologies too. UV-assisted intermittent chlorination lowers the chlorine dose needed, cutting DBP formation while maintaining microbiological safety. The team also developed advanced adsorption materials – which trap the chemicals on their surface – including silica aerogels and bio-based adsorbents capable of removing over 90 % of targeted DBPs. Plus, the UV-based systems can regenerate those adsorbents for reuse. H2OforAll is one of the seven founding members of the ZeroPollution4Water Cluster(opens in new window), which brings together EU-funded projects working to improve water quality, safeguard drinking water sources and protect groundwater from the impacts of climate change. “The cluster helped us position our results within a broader European context, identify synergies with other innovative technologies and strengthen our contribution to European water policy discussions,” says Martins. The project’s work is supporting policy development; its risk ranking of DBPs – the first of its kind worldwide – shows that current regulations may be targeting the wrong compounds, and its recommendations are feeding discussions on future EU water legislation. With several tools already validated in real-world conditions, H2OforAll’s ambition now is wider deployment, part of a broader push for safer and more climate-resilient water supplies across Europe.