Modelling Assisted Solid State Materials Development and Additive Manufacturing

Información del proyecto

MA.D.AM

Identificador del acuerdo de subvención: 101001567

DOI

10.3030/101001567

Fecha de la firma de la CE 27 Enero 2021

Fecha de inicio 1 Junio 2021

Fecha de finalización 30 Noviembre 2026

Financiado con arreglo a

• EXCELLENT SCIENCE - European Research Council (ERC)

Coste total

€ 1 999 587,00

Aportación de la UE

€ 1 999 587,00

Coordinado por

HELMHOLTZ-ZENTRUM HEREON GMBH
Germany

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Open Research Data Pilot (1)

Data Management Plan (DMP)

Data Management Plan in the Open Research Data Pilot

Publicaciones

Conference proceedings (10)

Grain Structure Evolution Ahead of the Die During Friction Extrusion of AA2024

Autores: Chang Yin-Cheng Chan, Uceu F. H. R. Suhuddin, Lars Rath, Felipe Labanca Bachiega, Benjamin Klusemann
Publicado en: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering., Edición volume 3, 2024, Página(s) 422-428, ISBN 978-3-031-41341-4
Editor: Springer Nature
DOI: 10.1007/978-3-031-41341-4_43

Behavior of volumetric core defects in friction extrusion of wire from Al-Cu alloy

Autores: Lars Rath, Uceu F.H. Suhuddin, Benjamin Klusemann
Publicado en: Materials Research Proceedings, Edición volume 41, 2024, Página(s) 763-770, ISBN 9781644903131
Editor: Materials Research Forum LLC
DOI: 10.21741/9781644903131-84

Comparison of different machine control modes during friction extrusion of AA2024

Autores: Harikrishna Rana, Chang Chan, Uceu F.H. Suhuddin, Noomane Ben Khalifa, Benjamin Klusemann
Publicado en: Materials Research Proceedings, Edición 54, 2025, Página(s) 772-779
Editor: Materials Research Forum LLC

Processability of Mg-Gd Powder via Friction Extrusion

Autores: Rath, L., Chan, C., Suhuddin, U., Buresch, H., Ebel, T., Klusemann, B.
Publicado en: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering., Edición volume 1, 2024, Página(s) 431-442, ISBN 978-3-031-41023-9
Editor: Springer Nature
DOI: 10.1007/978-3-031-41023-9_44

Experimental Investigation of Efficiency and Deposit Process Temperature during Multi-Layer Friction Surfacing

Autores: Zina Kallien, Arne Roos, Benjamin Klusemann
Publicado en: Key Engineering Materials, Edición volume 926, 2022, Página(s) 187-193, ISBN 978-3-0357-3750-9
Editor: Trans Tech Publications Ltd.
DOI: 10.4028/p-s43q63

On the relevance of descriptor fidelity in microstructure reconstruction

Autores: Paul Seibert, Alexander Raßloff, Karl Kalina, Ali Safi, Paul Reck, Daniel Peterseim, Benjamin Klusemann, Markus Kästner
Publicado en: Proceedings in AppliedMathematics and Mechanics, Edición volume 23, issue 3, 2023, Página(s) e202300116, ISSN 1617-7061
Editor: Wiley-VCH GmbH
DOI: 10.1002/pamm.202300116

Process simulation of friction extrusion of aluminum alloys

Autores: George Diyoke, Lars Rath, Rupesh Chafle, Noomane Ben Khalifa, Benjamin Klusemann
Publicado en: Materials Research Proceedings, Edición volume 28, 2023, Página(s) 487-494
Editor: Materials Research Forum LLC.
DOI: 10.21741/9781644902479-53

Comparison of Friction Extrusion Processing From Bulk and Chips of Aluminum-Copper Alloys

Autores: Lars Rath, Uceu F.H. Suhuddin, Benjamin Klusemann
Publicado en: Key Engineering Materials, Edición volume 926, 2022, Página(s) 471-480, ISBN 978-3-0357-3750-9
Editor: Trans Tech Publications Ltd.
DOI: 10.4028/p-vw04z5

Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties

Autores: Chang Yin-Cheng Chan, Lars Rath, Uceu F.H.Suhuddin, Benjamin Klusemann
Publicado en: Materials Research Proceedings, Edición volume 28, 2023, Página(s) 515-522
Editor: Materials Research Forum LLC
DOI: 10.21741/9781644902479-56

Analysis of a phase-field finite element implementation for precipitation

Autores: Ali Reza Safi, Rupesh Chafle, Benjamin Klusemann
Publicado en: Proceedings in Applied Mathematics and Mechanics, Edición volume 22, 2022, Página(s) e202200238
Editor: Wiley
DOI: 10.1002/pamm.202200238

Peer reviewed articles (19)

Impact of friction stir welding-like heat cycles on precipitates in AA7050 analysed by SAXS and numerical modelling

Autores: Susanne Henninger, Rupesh Chafle, Emad Maawad, Benjamin Klusemann, Martin Müller, Peter Staron
Publicado en: Materialia, Edición 39, 2025, Página(s) 102343, ISSN 2589-1529
Editor: Elsevier BV
DOI: 10.1016/j.mtla.2025.102343

Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing

Autores: Zina Kallien, Arne Roos, Christian Knothe-Horstmann, Benjamin Klusemann
Publicado en: Materials Science and Engineering: A, Edición volume 871, 2023, Página(s) 144872, ISSN 0921-5093
Editor: Elsevier BV
DOI: 10.1016/j.msea.2023.144872

Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

Autores: George Diyoke, Lars Rath, Rupesh Chafle, Noomane Ben Khalifa, Benjamin Klusemann
Publicado en: International Journal of Material Forming, Edición volume 17, 2024, ISSN 1960-6206
Editor: Springer-Verlag France
DOI: 10.1007/s12289-024-01825-z

Microstructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusion

Autores: Uceu F.H. Suhuddin, Lars Rath, Ricardo M. Halak, Benjamin Klusemann
Publicado en: Materials Characterization, Edición 205, 2023, Página(s) 113252 (13p.), ISSN 1044-5803
Editor: Elsevier BV
DOI: 10.1016/j.matchar.2023.113252

Correlation of Microstructure and Local Mechanical Properties Along Build Direction for Multi-layer Friction Surfacing of Aluminum Alloys

Autores: Zina Kallien, Marius Hoffmann, Arne Roos, Benjamin Klusemann
Publicado en: JOM, Edición 75, 2023, Página(s) 4212-4222, ISSN 1047-4838
Editor: J O M Institute
DOI: 10.1007/s11837-023-06046-4

Effect of ambient conditions in friction surfacing

Autores: M. Hoffmann, E. A. Duda, P. Aspes, B. Klusemann
Publicado en: Welding in the World, 2024, ISSN 0043-2288
Editor: International Institute of Welding/Institute International de la Soudure
DOI: 10.1007/s40194-024-01865-8

GPU-accelerated meshfree computational framework for modeling the friction surfacing process

Autores: Ahmed Elbossily, Zina Kallien, Rupesh Chafle, Kirk A. Fraser, Mohamadreza Afrasiabi, Markus Bambach, Benjamin Klusemann
Publicado en: Computational Particle Mechanics, 2025, ISSN 2196-4378
Editor: Springer Science and Business Media LLC
DOI: 10.1007/s40571-025-01048-2

Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures

Autores: Zina Kallien; Lars Rath; Arne Roos; Benjamin Klusemann
Publicado en: Additive Manufacturing Letters, Edición volume 8, 2024, Página(s) 100184, ISSN 2772-3690
Editor: Elsevier
DOI: 10.1016/j.addlet.2023.100184

Additive friction stir deposition vs. friction surfacing: Comparison of friction stir-based approaches for groove repair of high strength aluminum alloys

Autores: Zina Kallien, Victor A. Rojas, Pietro Aspes, Adam N. Swinney, Trevor J. Fleck, J. Brian Jordon, Paul G. Allison, Benjamin Klusemann
Publicado en: Materials & Design, Edición 258, 2025, Página(s) 114511, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2025.114511

Fatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacing

Autores: Zina Kallien, Christian Knothe-Horstmann, Benjamin Klusemann
Publicado en: Additive Manufacturing Letters, Edición volume 6, 2023, Página(s) 100154, ISSN 2772-3690
Editor: Elsevier
DOI: 10.1016/j.addlet.2023.100154

CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems

Autores: Elizabeth Mathew, Rupesh Chafle, Benjamin Klusemann
Publicado en: Calphad, Edición volume 85, 2024, Página(s) 102692, ISSN 1873-2984
Editor: Elsevier Ltd. All
DOI: 10.1016/j.calphad.2024.102692

Generative 3D reconstruction of Ti-6Al-4V basketweave microstructures by optimization of differentiable microstructural descriptors

Autores: Vincent Blümer, Ali Reza Safi, Celal Soyarslan, Benjamin Klusemann, Ton van den Boogaard
Publicado en: Acta Materialia, Edición 291, 2025, Página(s) 120947, ISSN 1359-6454
Editor: Elsevier BV
DOI: 10.1016/j.actamat.2025.120947

Insight into layer formation during friction surfacing: Relationship between deposition behavior and microstructure

Autores: Marius Hoffmann, Zina Kallien, Eduardo Antunes Duda, Benjamin Klusemann
Publicado en: Materials Today Communications, Edición 41, 2024, Página(s) 110337, ISSN 2352-4928
Editor: Elsevier BV
DOI: 10.1016/j.mtcomm.2024.110337

Fundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturing

Autores: Soujon, M.; Kallien, Z.; Roos, A.; Zeller-Plumhoff, B.; Klusemann, B.
Publicado en: Materials & Design, Edición volume 219, 2022, Página(s) 110786, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/j.matdes.2022.110786

Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing

Autores: Frederic E. Bock, Zina Kallien, Norber Huber, Benjamin Klusemann
Publicado en: Computer Methods in Applied Mechanics and Engineering, Edición 418, 2024, Página(s) 116453 (26p.), ISSN 0045-7825
Editor: Elsevier BV
DOI: 10.1016/j.cma.2023.116453

Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing

Autores: Zina Kallien, Benjamin Klusemann
Publicado en: Surface and Coatings Technology, Edición volume 437, 2022, ISSN 0257-8972
Editor: Elsevier BV
DOI: 10.1016/j.surfcoat.2022.128350

Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum

Autores: Ricardo M. Halak, Lars Rath, Uceu F.H.R. Suhuddin, Jorge F. dos Santos, Benjamin Klusemann
Publicado en: International Journal of Material Forming, Edición volume 15, 2022, ISSN 1960-6206
Editor: Springer-Verlag France
DOI: 10.1007/s12289-022-01670-y

Effect of consumable stud microstructure on friction surfacing: Comparison between friction extruded and hot extruded AA2024 studs

Autores: Pietro Aspes, Zina Kallien, Lars Rath, Uceu Suhuddin, Benjamin Klusemann
Publicado en: Journal of Materials Processing Technology, Edición 341, 2025, Página(s) 118862, ISSN 0924-0136
Editor: Elsevier BV
DOI: 10.1016/j.jmatprotec.2025.118862

A multi-component phase-field model for T1 precipitates in Al-Cu-Li alloys

Autores: Ali Reza Safi, Elizabeth Mathew, Rupesh Chafle, Benjamin Klusemann
Publicado en: Modelling and Simulation in Materials Science and Engineering, Edición 33, 2025, Página(s) 065009, ISSN 0965-0393
Editor: Institute of Physics Publishing
DOI: 10.1088/1361-651x/adf3d2