Modelling Assisted Solid State Materials Development and Additive Manufacturing

Rezultaty

Data Management Plan in the Open Research Data Pilot

Publikacje

Grain Structure Evolution Ahead of the Die During Friction Extrusion of AA2024

Autorzy: Chang Yin-Cheng Chan, Uceu F. H. R. Suhuddin, Lars Rath, Felipe Labanca Bachiega, Benjamin Klusemann
Opublikowane w: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering., Numer volume 3, 2024, Strona(/y) 422-428, ISBN 978-3-031-41341-4
Wydawca: Springer Nature
DOI: 10.1007/978-3-031-41341-4_43

Behavior of volumetric core defects in friction extrusion of wire from Al-Cu alloy

Autorzy: Lars Rath, Uceu F.H. Suhuddin, Benjamin Klusemann
Opublikowane w: Materials Research Proceedings, Numer volume 41, 2024, Strona(/y) 763-770, ISBN 9781644903131
Wydawca: Materials Research Forum LLC
DOI: 10.21741/9781644903131-84

Processability of Mg-Gd Powder via Friction Extrusion

Autorzy: Rath, L., Chan, C., Suhuddin, U., Buresch, H., Ebel, T., Klusemann, B.
Opublikowane w: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering., Numer volume 1, 2024, Strona(/y) 431-442, ISBN 978-3-031-41023-9
Wydawca: Springer Nature
DOI: 10.1007/978-3-031-41023-9_44

Experimental Investigation of Efficiency and Deposit Process Temperature during Multi-Layer Friction Surfacing

Autorzy: Zina Kallien, Arne Roos, Benjamin Klusemann
Opublikowane w: Key Engineering Materials, Numer volume 926, 2022, Strona(/y) 187-193, ISBN 978-3-0357-3750-9
Wydawca: Trans Tech Publications Ltd.
DOI: 10.4028/p-s43q63

On the relevance of descriptor fidelity in microstructure reconstruction

Autorzy: Paul Seibert, Alexander Raßloff, Karl Kalina, Ali Safi, Paul Reck, Daniel Peterseim, Benjamin Klusemann, Markus Kästner
Opublikowane w: Proceedings in AppliedMathematics and Mechanics, Numer volume 23, issue 3, 2023, Strona(/y) e202300116, ISSN 1617-7061
Wydawca: Wiley-VCH GmbH
DOI: 10.1002/pamm.202300116

Process simulation of friction extrusion of aluminum alloys

Autorzy: George Diyoke, Lars Rath, Rupesh Chafle, Noomane Ben Khalifa, Benjamin Klusemann
Opublikowane w: Materials Research Proceedings, Numer volume 28, 2023, Strona(/y) 487-494
Wydawca: Materials Research Forum LLC.
DOI: 10.21741/9781644902479-53

Comparison of Friction Extrusion Processing From Bulk and Chips of Aluminum-Copper Alloys

Autorzy: Lars Rath, Uceu F.H. Suhuddin, Benjamin Klusemann
Opublikowane w: Key Engineering Materials, Numer volume 926, 2022, Strona(/y) 471-480, ISBN 978-3-0357-3750-9
Wydawca: Trans Tech Publications Ltd.
DOI: 10.4028/p-vw04z5

Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties

Autorzy: Chang Yin-Cheng Chan, Lars Rath, Uceu F.H.Suhuddin, Benjamin Klusemann
Opublikowane w: Materials Research Proceedings, Numer volume 28, 2023, Strona(/y) 515-522
Wydawca: Materials Research Forum LLC
DOI: 10.21741/9781644902479-56

Analysis of a phase-field finite element implementation for precipitation

Autorzy: Ali Reza Safi, Rupesh Chafle, Benjamin Klusemann
Opublikowane w: Proceedings in Applied Mathematics and Mechanics, Numer volume 22, 2022, Strona(/y) e202200238
Wydawca: Wiley
DOI: 10.1002/pamm.202200238

Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing

Autorzy: Zina Kallien, Arne Roos, Christian Knothe-Horstmann, Benjamin Klusemann
Opublikowane w: Materials Science and Engineering: A, Numer volume 871, 2023, Strona(/y) 144872, ISSN 0921-5093
Wydawca: Elsevier BV
DOI: 10.1016/j.msea.2023.144872

Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

Autorzy: George Diyoke, Lars Rath, Rupesh Chafle, Noomane Ben Khalifa, Benjamin Klusemann
Opublikowane w: International Journal of Material Forming, Numer volume 17, 2024, ISSN 1960-6206
Wydawca: Springer-Verlag France
DOI: 10.1007/s12289-024-01825-z

Microstructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusion

Autorzy: Uceu F.H. Suhuddin, Lars Rath, Ricardo M. Halak, Benjamin Klusemann
Opublikowane w: Materials Characterization, Numer 205, 2023, Strona(/y) 113252 (13p.), ISSN 1044-5803
Wydawca: Elsevier BV
DOI: 10.1016/j.matchar.2023.113252

Correlation of Microstructure and Local Mechanical Properties Along Build Direction for Multi-layer Friction Surfacing of Aluminum Alloys

Autorzy: Zina Kallien, Marius Hoffmann, Arne Roos, Benjamin Klusemann
Opublikowane w: JOM, Numer 75, 2023, Strona(/y) 4212-4222, ISSN 1047-4838
Wydawca: J O M Institute
DOI: 10.1007/s11837-023-06046-4

Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures

Autorzy: Zina Kallien; Lars Rath; Arne Roos; Benjamin Klusemann
Opublikowane w: Additive Manufacturing Letters, Numer volume 8, 2024, Strona(/y) 100184, ISSN 2772-3690
Wydawca: Elsevier
DOI: 10.1016/j.addlet.2023.100184

Fatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacing

Autorzy: Zina Kallien, Christian Knothe-Horstmann, Benjamin Klusemann
Opublikowane w: Additive Manufacturing Letters, Numer volume 6, 2023, Strona(/y) 100154, ISSN 2772-3690
Wydawca: Elsevier
DOI: 10.1016/j.addlet.2023.100154

CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems

Autorzy: Elizabeth Mathew, Rupesh Chafle, Benjamin Klusemann
Opublikowane w: Calphad, Numer volume 85, 2024, Strona(/y) 102692, ISSN 1873-2984
Wydawca: Elsevier Ltd. All
DOI: 10.1016/j.calphad.2024.102692

Fundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturing

Autorzy: Soujon, M.; Kallien, Z.; Roos, A.; Zeller-Plumhoff, B.; Klusemann, B.
Opublikowane w: Materials & Design, Numer volume 219, 2022, Strona(/y) 110786, ISSN 0264-1275
Wydawca: Elsevier BV
DOI: 10.1016/j.matdes.2022.110786

Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing

Autorzy: Frederic E. Bock, Zina Kallien, Norber Huber, Benjamin Klusemann
Opublikowane w: Computer Methods in Applied Mechanics and Engineering, Numer 418, 2024, Strona(/y) 116453 (26p.), ISSN 0045-7825
Wydawca: Elsevier BV
DOI: 10.1016/j.cma.2023.116453

Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing

Autorzy: Zina Kallien, Benjamin Klusemann
Opublikowane w: Surface and Coatings Technology, Numer volume 437, 2022, ISSN 0257-8972
Wydawca: Elsevier BV
DOI: 10.1016/j.surfcoat.2022.128350

Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum

Autorzy: Ricardo M. Halak, Lars Rath, Uceu F.H.R. Suhuddin, Jorge F. dos Santos, Benjamin Klusemann
Opublikowane w: International Journal of Material Forming, Numer volume 15, 2022, ISSN 1960-6206
Wydawca: Springer-Verlag France
DOI: 10.1007/s12289-022-01670-y

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz