Modelling Assisted Solid State Materials Development and Additive Manufacturing

Risultati finali

Data Management Plan in the Open Research Data Pilot

Pubblicazioni

Grain Structure Evolution Ahead of the Die During Friction Extrusion of AA2024

Autori: Chang Yin-Cheng Chan, Uceu F. H. R. Suhuddin, Lars Rath, Felipe Labanca Bachiega, Benjamin Klusemann
Pubblicato in: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering., Numero volume 3, 2024, Pagina/e 422-428, ISBN 978-3-031-41341-4
Editore: Springer Nature
DOI: 10.1007/978-3-031-41341-4_43

Behavior of volumetric core defects in friction extrusion of wire from Al-Cu alloy

Autori: Lars Rath, Uceu F.H. Suhuddin, Benjamin Klusemann
Pubblicato in: Materials Research Proceedings, Numero volume 41, 2024, Pagina/e 763-770, ISBN 9781644903131
Editore: Materials Research Forum LLC
DOI: 10.21741/9781644903131-84

Processability of Mg-Gd Powder via Friction Extrusion

Autori: Rath, L., Chan, C., Suhuddin, U., Buresch, H., Ebel, T., Klusemann, B.
Pubblicato in: Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity. ICTP 2023. Lecture Notes in Mechanical Engineering., Numero volume 1, 2024, Pagina/e 431-442, ISBN 978-3-031-41023-9
Editore: Springer Nature
DOI: 10.1007/978-3-031-41023-9_44

Experimental Investigation of Efficiency and Deposit Process Temperature during Multi-Layer Friction Surfacing

Autori: Zina Kallien, Arne Roos, Benjamin Klusemann
Pubblicato in: Key Engineering Materials, Numero volume 926, 2022, Pagina/e 187-193, ISBN 978-3-0357-3750-9
Editore: Trans Tech Publications Ltd.
DOI: 10.4028/p-s43q63

On the relevance of descriptor fidelity in microstructure reconstruction

Autori: Paul Seibert, Alexander Raßloff, Karl Kalina, Ali Safi, Paul Reck, Daniel Peterseim, Benjamin Klusemann, Markus Kästner
Pubblicato in: Proceedings in AppliedMathematics and Mechanics, Numero volume 23, issue 3, 2023, Pagina/e e202300116, ISSN 1617-7061
Editore: Wiley-VCH GmbH
DOI: 10.1002/pamm.202300116

Process simulation of friction extrusion of aluminum alloys

Autori: George Diyoke, Lars Rath, Rupesh Chafle, Noomane Ben Khalifa, Benjamin Klusemann
Pubblicato in: Materials Research Proceedings, Numero volume 28, 2023, Pagina/e 487-494
Editore: Materials Research Forum LLC.
DOI: 10.21741/9781644902479-53

Comparison of Friction Extrusion Processing From Bulk and Chips of Aluminum-Copper Alloys

Autori: Lars Rath, Uceu F.H. Suhuddin, Benjamin Klusemann
Pubblicato in: Key Engineering Materials, Numero volume 926, 2022, Pagina/e 471-480, ISBN 978-3-0357-3750-9
Editore: Trans Tech Publications Ltd.
DOI: 10.4028/p-vw04z5

Friction extrusion processing of aluminum powders: Microstructure homogeneity and mechanical properties

Autori: Chang Yin-Cheng Chan, Lars Rath, Uceu F.H.Suhuddin, Benjamin Klusemann
Pubblicato in: Materials Research Proceedings, Numero volume 28, 2023, Pagina/e 515-522
Editore: Materials Research Forum LLC
DOI: 10.21741/9781644902479-56

Analysis of a phase-field finite element implementation for precipitation

Autori: Ali Reza Safi, Rupesh Chafle, Benjamin Klusemann
Pubblicato in: Proceedings in Applied Mathematics and Mechanics, Numero volume 22, 2022, Pagina/e e202200238
Editore: Wiley
DOI: 10.1002/pamm.202200238

Temperature-dependent mechanical behavior of aluminum AM structures generated via multi-layer friction surfacing

Autori: Zina Kallien, Arne Roos, Christian Knothe-Horstmann, Benjamin Klusemann
Pubblicato in: Materials Science and Engineering: A, Numero volume 871, 2023, Pagina/e 144872, ISSN 0921-5093
Editore: Elsevier BV
DOI: 10.1016/j.msea.2023.144872

Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

Autori: George Diyoke, Lars Rath, Rupesh Chafle, Noomane Ben Khalifa, Benjamin Klusemann
Pubblicato in: International Journal of Material Forming, Numero volume 17, 2024, ISSN 1960-6206
Editore: Springer-Verlag France
DOI: 10.1007/s12289-024-01825-z

Microstructure evolution and texture development during production of homogeneous fine-grained aluminum wire by friction extrusion

Autori: Uceu F.H. Suhuddin, Lars Rath, Ricardo M. Halak, Benjamin Klusemann
Pubblicato in: Materials Characterization, Numero 205, 2023, Pagina/e 113252 (13p.), ISSN 1044-5803
Editore: Elsevier BV
DOI: 10.1016/j.matchar.2023.113252

Correlation of Microstructure and Local Mechanical Properties Along Build Direction for Multi-layer Friction Surfacing of Aluminum Alloys

Autori: Zina Kallien, Marius Hoffmann, Arne Roos, Benjamin Klusemann
Pubblicato in: JOM, Numero 75, 2023, Pagina/e 4212-4222, ISSN 1047-4838
Editore: J O M Institute
DOI: 10.1007/s11837-023-06046-4

Application of friction surfacing for solid state additive manufacturing of cylindrical shell structures

Autori: Zina Kallien; Lars Rath; Arne Roos; Benjamin Klusemann
Pubblicato in: Additive Manufacturing Letters, Numero volume 8, 2024, Pagina/e 100184, ISSN 2772-3690
Editore: Elsevier
DOI: 10.1016/j.addlet.2023.100184

Fatigue crack propagation in AA5083 structures additively manufactured via multi-layer friction surfacing

Autori: Zina Kallien, Christian Knothe-Horstmann, Benjamin Klusemann
Pubblicato in: Additive Manufacturing Letters, Numero volume 6, 2023, Pagina/e 100154, ISSN 2772-3690
Editore: Elsevier
DOI: 10.1016/j.addlet.2023.100154

CALPHAD-based modeling of pressure-dependent Al, Cu and Li unary systems

Autori: Elizabeth Mathew, Rupesh Chafle, Benjamin Klusemann
Pubblicato in: Calphad, Numero volume 85, 2024, Pagina/e 102692, ISSN 1873-2984
Editore: Elsevier Ltd. All
DOI: 10.1016/j.calphad.2024.102692

Fundamental study of multi-track friction surfacing deposits for dissimilar aluminum alloys with application to additive manufacturing

Autori: Soujon, M.; Kallien, Z.; Roos, A.; Zeller-Plumhoff, B.; Klusemann, B.
Pubblicato in: Materials & Design, Numero volume 219, 2022, Pagina/e 110786, ISSN 0264-1275
Editore: Elsevier BV
DOI: 10.1016/j.matdes.2022.110786

Data-driven and physics-based modelling of process behaviour and deposit geometry for friction surfacing

Autori: Frederic E. Bock, Zina Kallien, Norber Huber, Benjamin Klusemann
Pubblicato in: Computer Methods in Applied Mechanics and Engineering, Numero 418, 2024, Pagina/e 116453 (26p.), ISSN 0045-7825
Editore: Elsevier BV
DOI: 10.1016/j.cma.2023.116453

Combined experimental-numerical analysis of the temperature evolution and distribution during friction surfacing

Autori: Zina Kallien, Benjamin Klusemann
Pubblicato in: Surface and Coatings Technology, Numero volume 437, 2022, ISSN 0257-8972
Editore: Elsevier BV
DOI: 10.1016/j.surfcoat.2022.128350

Changes in processing characteristics and microstructural evolution during friction extrusion of aluminum

Autori: Ricardo M. Halak, Lars Rath, Uceu F.H.R. Suhuddin, Jorge F. dos Santos, Benjamin Klusemann
Pubblicato in: International Journal of Material Forming, Numero volume 15, 2022, ISSN 1960-6206
Editore: Springer-Verlag France
DOI: 10.1007/s12289-022-01670-y

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica