Passive Actuated ventiLation Opening systeM for Aircraft

Leistungen

Plan for communication, dissemination and exploitation

Dissemination Plan Aimed at raising awareness of project activities and results within the research community as well as the general public

PALOMA test bench technical specification and design description, manufacturing and validation

D3.1:A specific test bench is needed to be developped for characterizing the technology.This test bench has to be conformed with the DO160 norm.All the partners will participate at the test bench definition.The prototype and demonstrator mock-ups will be tested on this test bench: - in ambient conditions to check that mechanism provide nominal performances - at low pressure (44mbars) - for an overpressure (1698mbars during 10 minutes) - icing - high, low and variation temperatures - humidity - cyclingOnce the test bench is assembled, it will needed to be verify/calibrated against the test bench test specification.The APAVE could certificate this test bench (APAVE is a testing, inspection and certification independent organisation).The document will be written as a user manual and will present the verification report.

Leistungen

Diese Seite teilen

Herunterladen