NEW MANUFACTURING ROUTES (FOR NiCrSiFeB ALLOYS) TO REPLACE COBALT IN AIRCRAFT COMPONENTS

Informations projet

NEMARCO

N° de convention de subvention: 101007948

DOI 10.3030/101007948

Projet clôturé

Date de signature de la CE 1 Decembre 2020

Date de début 1 Janvier 2021

Date de fin 31 Juillet 2023

Financé au titre de

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Coût total € 749 991,25

Contribution de l’UE € 749 991,25

Coordonné par

LORTEK S COOP
Spain

Livrables

Documents, reports (2)

Final report with main conclusions and lessons learnt

Final conclusions and lessons learnt

Plan for Dissemination and Exploitation of Results (PDER)

This deliverable will establish the rules for exploitation and dissemination addressed to results and knowledge obtained within the project that will be exploited and those which will be disseminated to the public through public reports andor journal publications and conferences

Open Research Data Pilot (1)

Data Management Plan (DMP)

Plan for data management

Publications

Other (1)

Jornada aviación: Oportunidades en HORIZONTE EUROPA y la colaboración DUAL

Auteurs: R. de Saja, Y. Núñez
Publié dans: 2021
Éditeur: ICE

Peer reviewed articles (2)

Chemical Composition Effects on the Microstructure and Hot Hardness of NiCrSiFeB Self-Fluxing Alloys Manufactured via Gravity Casting

Auteurs: Niklas A, Santos F, Garcia D, Rouco M, Gonzalez R, Pereira JC, Rayón E, Lopez P and Guillonneau G.
Publié dans: Journal of Manufacturing and Materials Processing, Numéro 7 (6), 2023, Page(s) 196, ISSN 2504-4494
Éditeur: MDPI
DOI: 10.3390/jmmp7060196

Influence of the Chemical Composition on the Solidification Path, Strengthening Mechanisms and Hardness of Ni-Cr-Si-Fe-B Self-Fluxing Alloys Obtained by Laser-Directed Energy Deposition

Auteurs: Pereira JC, Taboada MC, Niklas A, Rayón E, Rocchi J.
Publié dans: Journal of Manufacturing and Materials Processing, Numéro 7(3), 2023, Page(s) 110-131, ISSN 2504-4494
Éditeur: MDPI
DOI: 10.3390/jmmp7030110

Conference proceedings (1)

Development of a New Manufacturing Route by Direct Laser Metal Deposition With NiCrSiFeB Alloys to Replace Cobalt in Aeronautical Components

Auteurs: Pereira, J.C., Zubiri, F., Aguilar, D., Taboada, M., Guillonneau, G., Rocchi, J.
Publié dans: Proceedings of the ASME 2022 International Additive Manufacturing Conference, 2023, ISBN 978-0-7918-8660-1
Éditeur: ASME
DOI: 10.1115/iam2022-91705