NEW MANUFACTURING ROUTES (FOR NiCrSiFeB ALLOYS) TO REPLACE COBALT IN AIRCRAFT COMPONENTS

Projektinformationen

NEMARCO

ID Finanzhilfevereinbarung: 101007948

DOI 10.3030/101007948

Projekt abgeschlossen

EK-Unterschriftsdatum 1 Dezember 2020

Startdatum 1 Januar 2021

Enddatum 31 Juli 2023

Finanziert unter

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Gesamtkosten € 749 991,25

EU-Beitrag € 749 991,25

Koordiniert durch

LORTEK S COOP
Spain

Leistungen

Documents, reports (2)

Final report with main conclusions and lessons learnt

Final conclusions and lessons learnt

Plan for Dissemination and Exploitation of Results (PDER)

This deliverable will establish the rules for exploitation and dissemination addressed to results and knowledge obtained within the project that will be exploited and those which will be disseminated to the public through public reports andor journal publications and conferences

Open Research Data Pilot (1)

Data Management Plan (DMP)

Plan for data management

Veröffentlichungen

Other (1)

Jornada aviación: Oportunidades en HORIZONTE EUROPA y la colaboración DUAL

Autoren: R. de Saja, Y. Núñez
Veröffentlicht in: 2021
Herausgeber: ICE

Peer reviewed articles (2)

Chemical Composition Effects on the Microstructure and Hot Hardness of NiCrSiFeB Self-Fluxing Alloys Manufactured via Gravity Casting

Autoren: Niklas A, Santos F, Garcia D, Rouco M, Gonzalez R, Pereira JC, Rayón E, Lopez P and Guillonneau G.
Veröffentlicht in: Journal of Manufacturing and Materials Processing, Ausgabe 7 (6), 2023, Seite(n) 196, ISSN 2504-4494
Herausgeber: MDPI
DOI: 10.3390/jmmp7060196

Influence of the Chemical Composition on the Solidification Path, Strengthening Mechanisms and Hardness of Ni-Cr-Si-Fe-B Self-Fluxing Alloys Obtained by Laser-Directed Energy Deposition

Autoren: Pereira JC, Taboada MC, Niklas A, Rayón E, Rocchi J.
Veröffentlicht in: Journal of Manufacturing and Materials Processing, Ausgabe 7(3), 2023, Seite(n) 110-131, ISSN 2504-4494
Herausgeber: MDPI
DOI: 10.3390/jmmp7030110

Conference proceedings (1)

Development of a New Manufacturing Route by Direct Laser Metal Deposition With NiCrSiFeB Alloys to Replace Cobalt in Aeronautical Components

Autoren: Pereira, J.C., Zubiri, F., Aguilar, D., Taboada, M., Guillonneau, G., Rocchi, J.
Veröffentlicht in: Proceedings of the ASME 2022 International Additive Manufacturing Conference, 2023, ISBN 978-0-7918-8660-1
Herausgeber: ASME
DOI: 10.1115/iam2022-91705