Rezultaty Documents, reports (2) Final report with main conclusions and lessons learnt Final conclusions and lessons learnt Plan for Dissemination and Exploitation of Results (PDER) This deliverable will establish the rules for exploitation and dissemination addressed to results and knowledge obtained within the project that will be exploited and those which will be disseminated to the public through public reports andor journal publications and conferences Open Research Data Pilot (1) Data Management Plan (DMP) Plan for data management Publikacje Other (1) Jornada aviación: Oportunidades en HORIZONTE EUROPA y la colaboración DUAL Autorzy: R. de Saja, Y. Núñez Opublikowane w: 2021 Wydawca: ICE Peer reviewed articles (2) Chemical Composition Effects on the Microstructure and Hot Hardness of NiCrSiFeB Self-Fluxing Alloys Manufactured via Gravity Casting Autorzy: Niklas A, Santos F, Garcia D, Rouco M, Gonzalez R, Pereira JC, Rayón E, Lopez P and Guillonneau G. Opublikowane w: Journal of Manufacturing and Materials Processing, Issue 7 (6), 2023, Page(s) 196, ISSN 2504-4494 Wydawca: MDPI DOI: 10.3390/jmmp7060196 Influence of the Chemical Composition on the Solidification Path, Strengthening Mechanisms and Hardness of Ni-Cr-Si-Fe-B Self-Fluxing Alloys Obtained by Laser-Directed Energy Deposition Autorzy: Pereira JC, Taboada MC, Niklas A, Rayón E, Rocchi J. Opublikowane w: Journal of Manufacturing and Materials Processing, Issue 7(3), 2023, Page(s) 110-131, ISSN 2504-4494 Wydawca: MDPI DOI: 10.3390/jmmp7030110 Conference proceedings (1) Development of a New Manufacturing Route by Direct Laser Metal Deposition With NiCrSiFeB Alloys to Replace Cobalt in Aeronautical Components Autorzy: Pereira, J.C., Zubiri, F., Aguilar, D., Taboada, M., Guillonneau, G., Rocchi, J. Opublikowane w: Proceedings of the ASME 2022 International Additive Manufacturing Conference, 2023, ISBN 978-0-7918-8660-1 Wydawca: ASME DOI: 10.1115/iam2022-91705 Wyszukiwanie danych OpenAIRE... Podczas wyszukiwania danych OpenAIRE wystąpił błąd Brak wyników
