Project description
Exploring the design space for tomorrow's advanced aerofoils
Large- and small-scale changes in the shapes of aerofoils, together with the active control of these shapes depending on conditions, can have a significant impact on the aerodynamic performance of aircraft. The design space is virtually unlimited, and the characteristics that are affected quite numerous, so the rational design of optimised lifting surfaces would benefit tremendously from accurate predictive models. The EU-funded MONNALISA project will develop and validate a novel method to predict the non-linear aerodynamic properties of lifting surfaces with controls, leveraging a high-resolution database of relevant design parameters.
Objective
The performance-improvement objectives sought in the Clean Sky 2 Joint Undertaking requires a departure from conventional empennage configurations and technologies that constitute the current state of the art in aircraft design. An “Advanced Rear End” component for the forthcoming generation of ultra-efficient aircraft might consist of a very compact rear fuselage and tail surfaces with planforms significantly different from those currently used in terms of aspect ratio, taper ratio and sweep angle.
In this project, we aim at developing and validating an innovative, physics-based low-order method to predict the non-linear aerodynamic characteristics of lifting surfaces with controls whose geometry could significantly differ from the usual ones. The development and validation of the method relies on a high-resolution database scanning the extensive space of design parameters required in the call: sweep angle, aspect ratio, taper ratio, dihedral angle, shape of the leading edge and presence of ice. A recently validated approach, based on the most advanced techniques of uncertainty quantification, guarantees the reliability of the database of the aerodynamic characteristics that will drive the development of the method. The aerodynamic database will efficiently mix highly accurate experimental results with state-of-the-art, high-fidelity numerical simulations and lower fidelity simulations.
The success of the project is guaranteed by the scientific quality and reliability of the partners in the consortium that have extensive experience in aerospace research projects, by state-of-the-art experimental facilities and aerodynamic-simulation open-source codes, and by a judicious use of subcontracting.
Fields of science (EuroSciVoc)
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
CORDIS classifies projects with EuroSciVoc, a multilingual taxonomy of fields of science, through a semi-automatic process based on NLP techniques. See: The European Science Vocabulary.
- natural sciences computer and information sciences databases
- engineering and technology mechanical engineering vehicle engineering aerospace engineering aircraft
- natural sciences mathematics pure mathematics geometry
- engineering and technology mechanical engineering vehicle engineering aerospace engineering aeronautical engineering
You need to log in or register to use this function
We are sorry... an unexpected error occurred during execution.
You need to be authenticated. Your session might have expired.
Thank you for your feedback. You will soon receive an email to confirm the submission. If you have selected to be notified about the reporting status, you will also be contacted when the reporting status will change.
Keywords
Project’s keywords as indicated by the project coordinator. Not to be confused with the EuroSciVoc taxonomy (Fields of science)
Project’s keywords as indicated by the project coordinator. Not to be confused with the EuroSciVoc taxonomy (Fields of science)
Programme(s)
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
Multi-annual funding programmes that define the EU’s priorities for research and innovation.
-
H2020-EU.3.4. - SOCIETAL CHALLENGES - Smart, Green And Integrated Transport
MAIN PROGRAMME
See all projects funded under this programme -
H2020-EU.3.4.5.1. - IADP Large Passenger Aircraft
See all projects funded under this programme
Topic(s)
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Calls for proposals are divided into topics. A topic defines a specific subject or area for which applicants can submit proposals. The description of a topic comprises its specific scope and the expected impact of the funded project.
Funding Scheme
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
Funding scheme (or “Type of Action”) inside a programme with common features. It specifies: the scope of what is funded; the reimbursement rate; specific evaluation criteria to qualify for funding; and the use of simplified forms of costs like lump sums.
RIA - Research and Innovation action
See all projects funded under this funding scheme
Call for proposal
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
Procedure for inviting applicants to submit project proposals, with the aim of receiving EU funding.
(opens in new window) H2020-CS2-CFP11-2020-01
See all projects funded under this callCoordinator
Net EU financial contribution. The sum of money that the participant receives, deducted by the EU contribution to its linked third party. It considers the distribution of the EU financial contribution between direct beneficiaries of the project and other types of participants, like third-party participants.
20133 Milano
Italy
The total costs incurred by this organisation to participate in the project, including direct and indirect costs. This amount is a subset of the overall project budget.