Innovative Technologies for Inspecting Carbodies and for Development of Running Gear

Leistungen

Report on the impact on standards and regulations of the innovations developed in GEARBODIES At month 12 a progress report will be prepared

New concepts for journal bearing with increased lifetime

This deliverable will report the outcomes of T61 T62 and T63 and include the identified aspects affecting LCC and other main impacts in order to contribute to WP8

Selection of elastomer-based and journal bearing technology concepts

Report on outcomes of selection of elastomerbased components and journal bearing concepts with potentially improved durability reduced LCC and prolonged lifetime outcomes of Tasks 42 and 43 The deliverable will also include the AHP methodology developed in Task 41

Plan for evaluation and validation of GEARBODIES innovative concepts

Deliverable report including a plan of all activities scheduled in WP7 for the scope of evaluation through simulation and testing and validation of concepts developed in each work stream

Plan for dissemination and exploitation of project results (PDER)

Report outlining the dissemination and exploitation plan for the project

Dissemination and communication activity report

Report containing the summary of all the dissemination and communications activities in task 81

Tests in laboratory environment

Report including the results of the laboratory tests of both Inspections Systems on various composites and hybrid materials with several types of defects

Modelling of rail vehicle dynamics and simulation of running gear loads

Report on outcomes of investigated vehicle dynamic models and simulation of load cases

Modelling investigation and assessment

Definition of transducers specifications and assessment of thermography optical andor ultrasonic andor inductive excitation source and ultrasonic PE PA RES and SAFT candidate methods through modelling and simulation

Terms of reference, requirements and specifications for novel elastomer-based running gear components

Report including WP1 outcomes Subtasks 112 and 122 related to WS21 elastomerbased components for running gear

Terms of reference, requirements and specifications for novel journal bearing concept

Report including WP1 outcomes (Sub-tasks 1.1.1 and 1.2.1) related to WS2.2 – journal bearings.

Report on GEARBODIES demonstrators

Report on the research activities performed during GEARBODIES containing the publishable information from the demonstrators developed in WS1 WS21 and WS22

Terms of reference, requirements and specifications for carbody inspection technology

Report including WP1 outcomes Subtasks 111 and 121 related to WS1 carbody inspection technology

Veröffentlichungen

Study on the Predictability of the Vertical Impact of Rail Vehicles Running Gear on Rails considering Weather Conditions and Wagon Suspension Load

Autoren: Steišūnas, Stasys; Vaičiūnas, Gediminas; Bureika, Gintautas; Sánchez Martín, Celestino
Veröffentlicht in: Transport Problems, 2022, ISSN 1896-0596
Herausgeber: The Silesian University of Technology, Faculty of Transport
DOI: 10.20858/tp.2022.17.4.06

Ultrasonic Non-Contact Air-Coupled Technique for the Assessment of Composite Sandwich Plates Using Antisymmetric Lamb Waves

Autoren: Eduardo Moreno, Roberto Giacchetta, Ricardo Gonzalez, David Sanchez, Olalla Sanchez-Sobrado, Andrea Torre-Poza, Guillermo Cosarinsky, Wagner Coelho
Veröffentlicht in: Ndt, 2023, Seite(n) 58-73, ISSN 2813-477X
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/ndt1010006

Effect of the chemical surrounding environment on the physical and mechanical properties of aged thermoplastic polymers

Autoren: Olalla Sánchez-Sobrado; Nikolaj Visniakov; Gintautas Bureika; Ricardo Losada; Elena Rodríguez
Veröffentlicht in: Heliyon, 2024, ISSN 2405-8440
Herausgeber: Elsevier
DOI: 10.1016/j.heliyon.2024.e24146

Exploring Step-Heating and Lock-In Thermography NDT Using One-Sided Inspection on Low-Emissivity Composite Structures for New Rail Carbodies

Autoren: Alkiviadis Tromaras; Vasileios Kappatos
Veröffentlicht in: Sensors, Ausgabe REPOSITORY MISSING, 2023, ISSN 1424-8220
Herausgeber: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/s22218195

Adaptation of passenger car suspension parameters to independiently rotating wheels

Autoren: Gediminas VAIČIŪNAS, Stasys STEIŠŪNAS, Gintautas BUREIKA
Veröffentlicht in: Transport Problems, 2022, Seite(n) 215 - 226, ISSN 2300-861X
Herausgeber: Silesian University of Technology
DOI: 10.20858/tp.2022.17.1.18

Extending the lifetime of journal bearings for high-speed trains

Autoren: LICCIARDELLO, Riccardo; Bureika, Gintautas; Rosenheinrich, Bert; Olalla, Sánchez-Sobrado; Schneider, Patrick; Shahidzadeh Arabani, Sina; Ulianov, Cristian; Wirth, Philipp
Veröffentlicht in: WCRR 2022, 2022
Herausgeber: Not published yet
DOI: 10.5281/zenodo.10464410

Non destructive testing using thermography for rail carbodies made of composite materials ( Μη καταστροφικός έλεγχος βαγονιών τρένων κατασκευασμένα από σύνθετα υλικά με την χρήση θερμογραφίας και η εφαρμογή της στο έλεγχο σιδηροδρομικών οχημάτων)

Autoren: Tromaras, Alkiviadis; Kappatos, Vassilios; Avdelidis, Ikolaos
Veröffentlicht in: ICTR 2022, 2022
Herausgeber: TBF
DOI: 10.5281/zenodo.10411334

GEARBODIES - Innovative Technologies for Inspecting Carbodies and for Development of Running Gear

Autoren: Celestino Sánchez Martín, Stefanos Gogos
Veröffentlicht in: Transportation Research Procedia, Ausgabe REPOSITORY MISSING, 2023, ISSN 2352-1465
Herausgeber: Elsevier
DOI: 10.1016/j.trpro.2023.11.685

Infrared thermographic modelling of defects in hybrid nature composite materials for new rail carbodies

Autoren: Alkiviadis Tromaras, Vassilios Kappatos, Nicolas P. Avdelidis
Veröffentlicht in: Thermosense: Thermal Infrared Applications XLIV, 2022
Herausgeber: SPIE
DOI: 10.1117/12.2619432

Leistungen

Veröffentlichungen

Diese Seite teilen

Herunterladen