Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Sustainable Design of 3D-printed Responsive Interfaces for Electrically Monitoring Bistable (Supra)Molecular Switches: Towards 3D-printed Logic Gates

Descripción del proyecto

Impresión 3D para la electrónica molecular reactiva de los dispositivos inteligentes impresos en 3D

La electrónica molecular en la que los componentes de silicio se sustituyen por compuertas lógicas moleculares es una solución muy prometedora para el problema de incluir un número creciente de transistores en espacios cada vez reducidos. La ampliación del potencial de las moléculas más allá de leer únicamente señales salientes para transducirlas se beneficiaría enormemente de un método de fabricación tridimensional (3D) ascendente. El equipo del proyecto R3DINBOW, que cuenta con al apoyo de las Acciones Marie Skłodowska-Curie, está desarrollando una tecnología de impresión 3D que se empleará para probar interfaces reactivas impresas en 3D capaces de leer los estados de interruptores supramoleculares. Este componente básico podría preparar el terreno para la próxima generación de dispositivos electrónicos inteligentes impresos en 3D.

Objetivo

The ability of electronic devices to act as switches makes digital information processing possible. The current silicon-based semiconductor processors are fabricated according to a top-down principle. However, the need to scale down in the size of such electronic devices has prompted the search for molecule-based information processing components (Molecular Electronics), such as switching memories, sensors and logic gates. Concretely, within the past two decades, developments in Nanotechnology have shown the capabilities of molecules to perform some of the computational logic functions - relating to the concept of logical zeros (0) and ones (1) binary code - achieved in mainstream semiconductor technology. Molecular logic gates differ from the currently used semiconductor elements by small size, multifunctional nature and variability of input and output signals. Nonetheless, the transition of logic elements from mostly optical means for reading output signals to electronic transduction tools would be beneficial for developing many novel logic elements for information processing, (bio)sensing and actuation. Accordingly, the design, construction and miniaturization of molecular electronic systems capable of performing complex logic functions is a current challenge. Herein, 3D printing technology is presented as a promising tool to open up new horizons in the field of electronic devices in general, and molecular logic gates in particular. For this goal, a sustainable bottom-up approach has been devised for the development of the next generation of “intelligent” 3D-printed electronic devices - 3D-printed responsive interfaces -, where bistable (supra)molecular switches will be electrically read out on carbon-based 3D-printed conductive substrates as the proof. Accordingly, R3DINBOW is in strong agreement with the EU’s digital strategy, while helping to achieve its target of a climate-neutral Europe by 2050 and responding to the current needs of our Society.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF)

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) H2020-MSCA-IF-2020

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

VYSOKE UCENI TECHNICKE V BRNE
Aportación neta de la UEn
€ 144 980,64
Dirección
ANTONINSKA 548/1
602 00 BRNO STRED
Chequia
Región
Česko Jihovýchod Jihomoravský kraj
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total
€ 144 980,64