Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

Sustainable Design of 3D-printed Responsive Interfaces for Electrically Monitoring Bistable (Supra)Molecular Switches: Towards 3D-printed Logic Gates

Descrizione del progetto

Stampa 3D di elettronica molecolare reattiva per dispositivi intelligenti stampati in 3D

L’elettronica molecolare in cui i componenti di silicio sono sostituiti da porte logiche molecolari è una soluzione molto promettente al problema di inserire una quantità crescente di transistor in spazi sempre più piccoli. Un approccio di produzione 3D dal basso verso l’alto apporterebbe enormi vantaggi all’estensione del potenziale delle molecole al di là della semplice lettura dei segnali di uscita ai fini della trasduzione. Con il sostegno del programma di azioni Marie Skłodowska-Curie, il progetto R3DINBOW sta sviluppando una tecnologia di stampa 3D che sarà utilizzata per dimostrare interfacce reattive stampate in 3D in grado di leggere gli stati degli interruttori supramolecolari. Questo elemento costitutivo potrebbe aprire la strada alla prossima generazione di dispositivi elettronici intelligenti stampati in 3D.

Obiettivo

The ability of electronic devices to act as switches makes digital information processing possible. The current silicon-based semiconductor processors are fabricated according to a top-down principle. However, the need to scale down in the size of such electronic devices has prompted the search for molecule-based information processing components (Molecular Electronics), such as switching memories, sensors and logic gates. Concretely, within the past two decades, developments in Nanotechnology have shown the capabilities of molecules to perform some of the computational logic functions - relating to the concept of logical zeros (0) and ones (1) binary code - achieved in mainstream semiconductor technology. Molecular logic gates differ from the currently used semiconductor elements by small size, multifunctional nature and variability of input and output signals. Nonetheless, the transition of logic elements from mostly optical means for reading output signals to electronic transduction tools would be beneficial for developing many novel logic elements for information processing, (bio)sensing and actuation. Accordingly, the design, construction and miniaturization of molecular electronic systems capable of performing complex logic functions is a current challenge. Herein, 3D printing technology is presented as a promising tool to open up new horizons in the field of electronic devices in general, and molecular logic gates in particular. For this goal, a sustainable bottom-up approach has been devised for the development of the next generation of “intelligent” 3D-printed electronic devices - 3D-printed responsive interfaces -, where bistable (supra)molecular switches will be electrically read out on carbon-based 3D-printed conductive substrates as the proof. Accordingly, R3DINBOW is in strong agreement with the EU’s digital strategy, while helping to achieve its target of a climate-neutral Europe by 2050 and responding to the current needs of our Society.

Campo scientifico (EuroSciVoc)

Parole chiave

Programma(i)

Argomento(i)

Meccanismo di finanziamento

MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF)

Vedi tutti i progetti finanziati nell’ambito di questo schema di finanziamento

Invito a presentare proposte

(si apre in una nuova finestra) H2020-MSCA-IF-2020

Vedi tutti i progetti finanziati nell’ambito del bando

Coordinatore

VYSOKE UCENI TECHNICKE V BRNE
Contributo netto dell'UE
€ 144 980,64
Indirizzo
ANTONINSKA 548/1
602 00 BRNO STRED
Cechia
Regione
Česko Jihovýchod Jihomoravský kraj
Tipo di attività
Higher or Secondary Education Establishments
Collegamenti
Costo totale
€ 144 980,64