Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS

Sustainable Design of 3D-printed Responsive Interfaces for Electrically Monitoring Bistable (Supra)Molecular Switches: Towards 3D-printed Logic Gates

Projektbeschreibung

3D-Druck von reaktionsfähiger molekularer Elektronik für intelligente 3D-gedruckte Geräte

Molekulare Elektronik, bei der Siliziumkomponenten durch molekulare Logikgatter ersetzt werden, stellt eine äußerst vielversprechende Lösung für das Problem dar, immer mehr Transistoren auf immer kleinerem Raum unterzubringen. Die Ausweitung des Potenzials von Molekülen über das einfache Lesen von Ausgangssignalen hinaus bis hin zu ihrer Umwandlung würde von einem von unten nach oben gerichteten 3D-Herstellungsansatz enorm profitieren. Mit Unterstützung durch die Marie-Skłodowska-Curie-Maßnahmen erarbeitet das Projekt R3DINBOW eine 3D-Drucktechnologie, mit der 3D-gedruckte reaktionsfähige Schnittstellen demonstriert werden sollen, die den Zustand supramolekularer Schalter auslesen können. Dieser Baustein könnte den Weg für die nächste Generation intelligenter 3D-gedruckter elektronischer Geräte ebnen.

Ziel

The ability of electronic devices to act as switches makes digital information processing possible. The current silicon-based semiconductor processors are fabricated according to a top-down principle. However, the need to scale down in the size of such electronic devices has prompted the search for molecule-based information processing components (Molecular Electronics), such as switching memories, sensors and logic gates. Concretely, within the past two decades, developments in Nanotechnology have shown the capabilities of molecules to perform some of the computational logic functions - relating to the concept of logical zeros (0) and ones (1) binary code - achieved in mainstream semiconductor technology. Molecular logic gates differ from the currently used semiconductor elements by small size, multifunctional nature and variability of input and output signals. Nonetheless, the transition of logic elements from mostly optical means for reading output signals to electronic transduction tools would be beneficial for developing many novel logic elements for information processing, (bio)sensing and actuation. Accordingly, the design, construction and miniaturization of molecular electronic systems capable of performing complex logic functions is a current challenge. Herein, 3D printing technology is presented as a promising tool to open up new horizons in the field of electronic devices in general, and molecular logic gates in particular. For this goal, a sustainable bottom-up approach has been devised for the development of the next generation of “intelligent” 3D-printed electronic devices - 3D-printed responsive interfaces -, where bistable (supra)molecular switches will be electrically read out on carbon-based 3D-printed conductive substrates as the proof. Accordingly, R3DINBOW is in strong agreement with the EU’s digital strategy, while helping to achieve its target of a climate-neutral Europe by 2050 and responding to the current needs of our Society.

Wissenschaftliches Gebiet (EuroSciVoc)

Schlüsselbegriffe

Programm/Programme

Thema/Themen

Finanzierungsplan

MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF)

Alle im Rahmen dieses Finanzierungsinstruments finanzierten Projekte anzeigen

Aufforderung zur Vorschlagseinreichung

(öffnet in neuem Fenster) H2020-MSCA-IF-2020

Alle im Rahmen dieser Aufforderung zur Einreichung von Vorschlägen finanzierten Projekte anzeigen

Koordinator

VYSOKE UCENI TECHNICKE V BRNE
Netto-EU-Beitrag
€ 144 980,64
Adresse
ANTONINSKA 548/1
602 00 BRNO STRED
Tschechien
Region
Česko Jihovýchod Jihomoravský kraj
Aktivitätstyp
Higher or Secondary Education Establishments
Links
Gesamtkosten
€ 144 980,64