Opto-Electronic Neural Connectoid Model Implemented for Neurodegenerative Disease

Informazioni relative al progetto

OpenMIND

ID dell’accordo di sovvenzione: 101047177

DOI

10.3030/101047177

Progetto chiuso

Data della firma CE 30 Giugno 2022

Data di avvio 1 Novembre 2022

Data di completamento 30 Aprile 2026

Finanziato da

• The European Innovation Council (EIC)

Costo totale

€ 2 992 203,75

Contributo UE

€ 2 992 203,75

Coordinato da

DANMARKS TEKNISKE UNIVERSITET
Denmark

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Websites, patent fillings, videos etc. (1)

Established public website and logo

The deliverable describes launching of the public website set up by DTUs communication service and design of project logo

Documents, reports (1)

Establish steering board and plan for partner and review meetings with the Commission

The deliverable is a report on the composition of the steering board as well as the planned bi-annual partner meetings and the two review meetings (M12 and M24 ).

Other (1)

Ethical permits for cell and animal experiments in place

The deliverable describes the taken measures and acquired permits to perform genetic modifications, use genetically modified stem cells, and perform animal experiments.

Pubblicazioni

Peer reviewed articles (5)

Fabrication of pyrolytic carbon interdigitated microelectrodes by maskless UV photolithography with epoxy-based photoresists SU-8 and mr-DWL

Autori: Støvring, Nicolai; Rezaei, Babak; Heiskanen, Arto; Emnéus, Jenny; Sylvest Keller, Stephan
Pubblicato in: Micro and Nano Engineering, 2024, ISSN 2590-0072
Editore: Elsevier
DOI: 10.1016/J.MNE.2024.100257

Microgel-Extracellular Matrix Composite Support for the Embedded 3D Printing of Human Neural Constructs

Autori: Janko Kajtez, Carmen Radeke, Johan Ulrik Lind, Jenny Emnéus
Pubblicato in: Journal of Visualized Experiments, 2024, ISSN 1940-087X
Editore: MyJove Corporation
DOI: 10.3791/65158

Microgel-Extracellular Matrix Composite Support for the Embedded 3D Printing of Human Neural Constructs

Autori: Janko Kajtez, Carmen Radeke, Johan Ulrik Lind, Jenny Emnéus
Pubblicato in: Journal of Visualized Experiments, 2023, ISSN 1940-087X
Editore: MyJove Corporation
DOI: 10.3791/65158

ACS applied materials & interfaces

Autori: Nicolai Støvring, Arto R. Heiskanen, Jenny Emnéus, and Stephan Sylvest Keller
Pubblicato in: ACS Appl. Mater. Interfaces, ISSN 1944-8244
Editore: ACS publications
DOI: 10.1021/ACSAMI.4C18998

Modular 3D printed platform for fluidically connected human brain organoid culture

Autori: Babak Rezaei, Jessica Giacomoni, Fredrik Nilsson, Edoardo Sozzi, Alessandro Fiorenzano, Malin Parmar, Stephan S Keller and Janko Kajtez
Pubblicato in: Biofabrication, 2023, ISSN 1758-5090
Editore: IOP Publishing
DOI: 10.1088/1758-5090/ad0c2c