Refractory Sorting Using Revolutionising Classification Equipment

Leistungen

Comprehensive fractional class analysis and comminution investigations

For sorting of spent refractories, identification of usable property differences and the most suitable comminution technology are prerequisites. The results of these studies conducted within task T 4.1 will be delivered as report D 4.1.

Report on bulk powder characteristics and direct sorting methods

This deliverable is connected to the task T 71 It will present the results from the characterization of bulk powder along with the corresponding direct sorting methods

Testing of classification and sorting methods at laboratory scale

Based on the content of report D 4.1, laboratory testing of classification and sorting methods will be conducted within task T 4.2 will yield results which are delivered as report D 4.2.

Review report on refractory recycling in Europe

For the subsequent optimization of the waste management system, a critical review of the current situation is required. Therefore, a manuscript on the fate of refractory wastes in the EU will be prepared. This review report covers the entire process chain of refractory recycling from waste production to recycling or disposal and reflects the outcomes of task T 3.1. This manuscript will be used as the base for a submission to a peer-reviewed journal, e.g., Waste Management, later on.

First report on networking and joint activities

The purpose of this report in task T93 is to present an overview of the networking and joint activities completed by the ReSoURCE consortium in the first 18 months of the project in order to generate enhanced collaborations with other relevant international organisations and projects on the topic of refractory materials circular economy raw materials green transition

Preliminary flowsheet design

Within the first part of task T 4.3, the results of tasks T 4.1 and T 4.2 will be used to develop a preliminary flowsheet design which will be summarized as report D 4.3.

Original report on refractory waste and typical degradation features

For the subsequent classification and sorting of spent refractories as well as for the production of more sustainable refractories having longer lifetimes characteristic features of spent refractories are determined within task T 3.3. The results will be represented by a manuscript, which will later on be used as a base for a peer-reviewed journal submission, e.g., the Journal of Cleaner Production.

Second report on networking and joint activities

The purpose of this report in task T9.3 is to present an overview of the networking and joint activities completed by the ReSoURCE consortium in the next 12 months (from M19 to M30) of the project in order to generate enhanced collaborations with other relevant international organisations and projects on the topic of refractory materials, circular economy, raw materials, green transition.

Key stakeholders identified

The results of the ReSoURCE project will have an impact on many stakeholders in Europe and globally The report prepared in task T112 for this deliverable will describe ReSoURCE mapping activities of EU and nonEU stakeholders including their identification assessment and prioritization and the engagement strategy to enhance their involvement

Website portal and social media channels

For the representation of the project to the public the website and social media channels eg Twitter LinkedIn YouTube and ResearchGate will be established as part of the task T 114 The deliverable will be validated by the web presence of the ReSoURCE project in the mentioned platforms

Veröffentlichungen

Enhancing Recycling Efficiency of Residual Refractory Materials: Experimental Methods and Fine Particle Classification Techniques

Autoren: Kristin Søiland, Franz Otto von Hafenbrädl, Akhilesh Kumar Srivastava, and Chandana Ratnayake
Veröffentlicht in: Proceedings of the 11th International Conference on Conveying and Handling of Particulate Solids, 2024
Herausgeber: Zenodo
DOI: 10.5281/zenodo.14034595

Elektrodynamische Fragmentierung als alternative Zerkleinerungslösung für das Recycling von Feuerfestmaterial

Autoren: Karl Friedrich, Helmut Flachberger
Veröffentlicht in: 2023
Herausgeber: Tagungsband: Tagung 2023, Aufbereitung und Recycling, 16. & 17.11.2023

ReSoURCE: Ein Projekt um die Wertschöpfungskette in der Feuerfestindustrie zu schließen

Autoren: Friedrich, K., Flachberger, H., Feucht, F., Pomberger, R., Sedlazeck, K. P., Heid, S., Königshofer, S. & Leitner, A.
Veröffentlicht in: Forum Mineralische Rohstoffe, 2023
Herausgeber: Stain & Kies

Evaluation of comminution processes for refractory material using the Degree of digestion of particles in the dispersity range < 4mm: jaw crusher, impact mill, cone crusher, electrodynamic fragmentation

Autoren: Karl Friedrich, Helmut Flachberger
Veröffentlicht in: Conference proceedings of Processing and Recycling Conference 2024, 2024
Herausgeber: UVR-FIA GmbH

The heat is on! - From the material characterisation of spent refractory bricks to sensor training (practical examples from Project ReSoURCE)

Autoren: Florian Feucht, Simone Neuhold, Alexander Leitner, Cord Fricke-Begemann & Julio Hernandez
Veröffentlicht in: VORTRÄGE-Konferenzband zur 17. Recy & DepoTech-Konferenz 2024, 2024, ISBN 978-3-200-09925-8
Herausgeber: Montanuniversität Leoben, Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft (AVAW

Sustainable Refractory Recycling: Innovative Solutions for a Circular Economy

Autoren: Simone Neuhold, Alexander Leitner, Florian Feucht, Philipp Sedlazeck, Volker Mrkens, Markus Dargel, Joachim Makowe, Dennis Adamek, Julio Hernandez
Veröffentlicht in: Mineralische Nebenprodukte und Abfälle 11 - Aschen, Schlacken, Stäube und Baurestmassen, 2024, ISBN 978-3-911006-81-1
Herausgeber: Thomé-Kozmiensky Verlag GmbH

Refractory breakouts: Comminution technology validation for MgO-C refractories

Autoren: Zixuan Zhang
Veröffentlicht in: Montanuniversität Chair of Mineral Processing, Ausgabe NA, 2024
Herausgeber: NA

Coarse comminution of refractory bricks as preparation for sensor-based sorting

Autoren: Markus Brechlmacher
Veröffentlicht in: MUL, Chair of Mineral Processing, master program “Mineral Processing, 2023
Herausgeber: NA

Konzeptionierung zur Sensorfusion von 3D-Kamera, HSI und LIBS beim Recycling von Feuerfeststeinen

Autoren: Yannick Conin
Veröffentlicht in: Master thesis at RWTH Aachen university, 2024
Herausgeber: RWTH Aachen University

Development of Circular Economy Routes for Refractory Waste

Autoren: Sheikh Saimon Ahamed Abir
Veröffentlicht in: Master Thesis, University of South-eastern Norway (USN), in collaboration with SINTEF, 2023
Herausgeber: NA

At the beginning of Project ReSoURCE

Autoren: Florian Feucht, Philipp Sedlazeck, Karl Friedrich, Theresa Sattler, Roland Pomberger
Veröffentlicht in: "12. Wissenschaftskongress ""Abfall- und Ressourcenwirtschaft""", Ausgabe 12, 2023
Herausgeber: innsbruck university press

Enhancing Refractory Recycling: The Role of Automated Sensor-Based Sorting Systems

Autoren: Alexander Leitner, Simone Neuhold, Stefan Heid, Daniela Gavagnin, Pia Maria Meschik, Raffael Stastny, Barbara Zocratto, Matheus Moraes Naves
Veröffentlicht in: RHI Magnesita Bulletin 2024, 2024
Herausgeber: RHI Magnesita

Leistungen

Veröffentlichungen

Diese Seite teilen

Herunterladen