Plastics Recycling from and for home appliances, toys and textile

Projektinformationen

PRecycling

ID Finanzhilfevereinbarung: 101058670

DOI

10.3030/101058670

EK-Unterschriftsdatum 13 Mai 2022

Startdatum 1 April 2022

Enddatum 31 März 2026

Finanziert unter

• Digital, Industry and Space

Gesamtkosten

€ 6 974 419,50

EU-Beitrag

€ 6 974 419,00

Koordiniert durch

ETHNICON METSOVION POLYTECHNION
Greece

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (4)

Review of the best practices used in industry / EU countries for calculating, verifying & reporting of recycled plastic content in products

Reviewing available methods, best practices, standards and certification schemes for recycled plastics will be reported including different methods used for establishing recycled content, composition and properties of the recyclate, and screening on substances of concern according to the different applications. D1.2 will be elaborated by COOLREC in collaboration with EuPC, BASF and ARCELIK.

Analytical verification protocol for each use case recycling input with aligned acceptance criteria

An established verification protocol by comparative analyses of recycled and non-recycled materials will be developed to define the recyclate content, addressing critical factors that influence material/product safety and setting acceptance criteria.D3.3 will be elaborated by BASF in collaboration with AIJU, COOLREC, MIRTEC and NTUA-LPT/R-Nano.

Communication and Dissemination Plan

A detailed and agile dissemination, communication and awareness plan containing the identification of stakeholders, dissemination methods and channels according to the EC, GA and CA to reach the expected impacts in terms of awareness, and the schedule and complementarities of dissemination and communication among partners delivered.D7.1 will be elaborated by EUPC in collaboration with STRATA.

Inventory and characterization of the EoL PWS for the different applications

An inventory containing information about the type of collected product, volumes, polymer and/or additive/filler identification, and substances of concern in PWS will be created, including the characterization of the EoL PWS for the different applications. D1.1 will be elaborated by ATTICA in collaboration with COOLREC, CIRCULARISE, AIJU and BASF.

Data sets, microdata, etc (1)

Comprehensive multi-modal data set for different sampling strategies

Analytical data provided by various methods will be clustered to establish efficient sampling strategies.D3.1 will be collaborative work of COOLREC, BASF, FRAUNHOFER and AIMEN. The first version will be issued by M18 and the final will be submitted at M30. M18 versions will be included within the 1st Periodic Report (M1-M18).

Other (1)

Ethics requirements

A description of the ethic requirements that will be implemented to safeguard personal data from stakeholders/experts, including informed consent form template and procedures, data protection policy and security measures to prevent unauthorized access to personal data. All ethics issues related to activities in the project: humans, personal data, non-EU countries and environment, health and safety and any additional ethics issues that may emerge during the project implementation will be addressed in compliance with ethical principles, the applicable international and national law, and the provisions set out in the Grant Agreement. D8.3 will be elaborated by NTUA in collaboration with all partners.

Veröffentlichungen

Peer reviewed articles (4)

Dissipation of the carbon resource embedded in end-of-life plastics: exploring the limits of chemical recycling to monomer

Autoren: Balasuriyage Thulangi Gayathma Balasuriya, Khung Hanh Le, Michael Zwicky Hauschild, Stig Irving Olsen, Mikołaj Owsianiak
Veröffentlicht in: The International Journal of Life Cycle Assessment, 2025, ISSN 0948-3349
Herausgeber: Springer Science and Business Media LLC
DOI: 10.1007/S11367-025-02528-6

Rapid Non-Destructive Polymer Degradation Degree Evaluation Method Using Quantitative Structure-Property Relationship

Autoren: A. E. Krauklis, F. Verceux, S. Grammatikos
Veröffentlicht in: Mechanics of Composite Materials, 2025, ISSN 0191-5665
Herausgeber: Springer Science and Business Media LLC
DOI: 10.1007/S11029-025-10303-9

On the durability of secondary PLA after use and multiple reprocessing iterations

Autoren: Floriane Verceux, Sotirios Grammatikos
Veröffentlicht in: Polymer Testing, Ausgabe 152, 2025, ISSN 0142-9418
Herausgeber: Elsevier BV
DOI: 10.1016/J.POLYMERTESTING.2025.108982

Recent Trends of Recycling and Upcycling of Polymers and Composites: A Comprehensive Review

Autoren: Christina Podara, Stefania Termine, Maria Modestou, Dionisis Semitekolos, Christos Tsirogiannis, Melpo Karamitrou, Aikaterini-Flora Trompeta, Tatjana Kosanovic Milickovic, Costas Charitidis
Veröffentlicht in: Recycling, Ausgabe 9, 2024, ISSN 2313-4321
Herausgeber: MDPI AG
DOI: 10.3390/recycling9030037

Conference proceedings (1)

X-ray micro-computed tomography for non-destructive analysis of thermoplastic (nano)composites processability and homogeneity

Autoren: Eleni Gkartzou, Konstantinos Zafeiris, Christos Tsirogiannis, Artemis Kontiza, Tatjana Kosanovic Milickovic, Costas Charitidis
Veröffentlicht in: International Conference on Polymer Process Innovation | PPI 2023, 2023
Herausgeber: PPI