Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

High voltage, room temperature single-ion polymer electrolyte for safer all solid state lithium metal batteries

Description du projet

Améliorer les batteries tout-solide destinées aux véhicules électriques

Les batteries tout-solide promettent une plus grande densité de stockage d’énergie et sont meilleur marché et plus sûres que les batteries traditionnelles destinées aux véhicules électriques. Une batterie à l’état solide utilise des électrolytes solides et une anode lithium-métal. Le projet PSIONIC, financé par l’UE, entend faire progresser le développement de la technologie des batteries tout-solide en utilisant un oxyde de polyéthylène réticulé amorphe laminé sur la fine feuille de lithium à l’anode et une cathode haute-tension revêtue d’un polymère conducteur à ion unique. Cette avancée technologique accélérera le remplacement des électrolytes liquides, à la fois inflammables et instables. Le projet contribuera à rendre les batteries tout-solide plus sûres, moins onéreuses, plus fiables et plus durables. Il favorisera l’adoption plus généralisée des véhicules électriques à batterie.

Objectif

The greatest challenges towards the worldwide success of battery-powered electric vehicles revolve around the safety,
energy density, and cost of the battery technologies. Solid-state polymer electrolytes and lithium metal anode address
these challenges by replacing the flammable and unstable liquid electrolytes and enabling dendrite-free cycling of
high-energy lithium metal cells manufactured by sustainable and cost-effective processing. The PSIONIC project
advances the development of all-solid-state battery technology by employing amorphous cross-linked Polyethylene
oxide (PEO) laminated on the thin lithium foil at the anode and high voltage cathode coated with a single-ion conductive
polymer. This will allow to replace the flammable and unstable liquid electrolytes and enabling dendrite-free cycling
of high-energy lithium metal cells manufactured by sustainable processing. Special attention will be devoted to the
optimization of interfaces between the active material and polymer electrolyte. Materials selection will enable the use
of the manufacturing technology available at BlueSolutions, which is readily scalable, based on sustainable processing
using solvent-free extrusion. PSIONIC is aiming to develop cells with a safety hazard level 2, since no liquid component
will be in the cell at the end of the project.
The research and innovation actions carried under the PSIONIC project will not only just contribute to the technological
advancements of all-solid-state Li-ion batteries in terms of safety, reliability, performance, cost, and sustainability, but
will also enable higher uptake by the electromobility sector and end consumers, paving a pathway towards climate
neutrality, and green energy transition.

Champ scientifique (EuroSciVoc)

Mots‑clés

Programme(s)

Thème(s)

Régime de financement

HORIZON-RIA - HORIZON Research and Innovation Actions

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) HORIZON-CL5-2021-D2-01

Voir tous les projets financés au titre de cet appel

Coordinateur

BLUE SOLUTIONS
Contribution nette de l'UE
€ 1 359 740,00
Adresse
ODET
29500 Ergue Gaberic
France
Région
Bretagne Bretagne Finistère
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total
€ 1 359 740,00

Participants (14)

Partenaires (1)