Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS

High voltage, room temperature single-ion polymer electrolyte for safer all solid state lithium metal batteries

Projektbeschreibung

Festkörperbatterien für Elektrofahrzeuge optimieren

Festkörperbatterien versprechen eine höhere Energiespeicherdichte und sind günstiger und sicherer als herkömmliche Batterien für Elektrofahrzeuge. In einer Festkörperbatterie werden feste Elektrolyte und eine Lithiummetallanode verwendet. Das EU-finanzierte Projekt PSIONIC zielt darauf ab, die Entwicklung der Festkörperbatterietechnologie voranzutreiben, indem amorphes, vernetztes Polyethylenoxid auf die dünne Lithiumfolie an der Anode und eine Hochspannungskathode laminiert wird, die mit einem leitfähigen Einzelionenpolymer beschichtet ist. Dieser technologische Fortschritt wird dazu beitragen, flüssige Elektrolyte zu ersetzen, die brennbar und instabil sind. Das Projekt leistet einen Beitrag dazu, Festkörperbatterien sicherer, günstiger, zuverlässiger und nachhaltiger zu gestalten. Daraus wird eine höhere Verbreitung von batteriebetriebenen Elektrofahrzeugen resultieren.

Ziel

The greatest challenges towards the worldwide success of battery-powered electric vehicles revolve around the safety, energy density, and cost of the battery technologies. Solid-state polymer electrolytes and lithium metal anode address these challenges by replacing the flammable and unstable liquid electrolytes and enabling dendrite-free cycling of high-energy lithium metal cells manufactured by sustainable and cost-effective processing. The PSIONIC project advances the development of all-solid-state battery technology by employing amorphous cross-linked Polyethylene oxide (PEO) laminated on the thin lithium foil at the anode and high voltage cathode coated with a single-ion conductive polymer. This will allow to replace the flammable and unstable liquid electrolytes and enabling dendrite-free cycling of high-energy lithium metal cells manufactured by sustainable processing. Special attention will be devoted to the optimization of interfaces between the active material and polymer electrolyte. Materials selection will enable the use of the manufacturing technology available at BlueSolutions, which is readily scalable, based on sustainable processing using solvent-free extrusion. PSIONIC is aiming to develop cells with a safety hazard level 2, since no liquid component will be in the cell at the end of the project.
The research and innovation actions carried under the PSIONIC project will not only just contribute to the technological advancements of all-solid-state Li-ion batteries in terms of safety, reliability, performance, cost, and sustainability, but will also enable higher uptake by the electromobility sector and end consumers, paving a pathway towards climate neutrality, and green energy transition.

Wissenschaftliches Gebiet (EuroSciVoc)

CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.

Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen

Finanzierungsplan

HORIZON-RIA -

Koordinator

BLUE SOLUTIONS
Netto-EU-Beitrag
€ 1 916 560,00
Adresse
ODET
29500 Ergue Gaberic
Frankreich

Auf der Karte ansehen

Region
Bretagne Bretagne Finistère
Aktivitätstyp
Private gewinnorientierte Einrichtungen (mit Ausnahme von mittleren und höheren Bildungseinrichtungen)
Links
Gesamtkosten
€ 1 916 560,00

Beteiligte (13)

Partner (1)