Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

High voltage, room temperature single-ion polymer electrolyte for safer all solid state lithium metal batteries

Opis projektu

Ulepszenie akumulatorów z elektrolitem stałym przeznaczonych dla pojazdów elektrycznych

Akumulatory z elektrolitem stałym cechują się większą gęstością magazynowania energii oraz są tańsze i bezpieczniejsze niż tradycyjne akumulatory dla pojazdów elektrycznych. W akumulatorach tego typu stosuje się elektrolit stały oraz metalową anodę z litu. Zespół finansowanego ze środków UE projektu PSIONIC zamierza przyspieszyć rozwój technologii akumulatorów z elektrolitem stałym poprzez zastosowanie amorficznego wzajemnie powiązanego tlenku polietylenu laminowanego na cienkiej folii litowej w anodzie oraz wysokonapięciowej katody pokrytej polimerem przewodzącym pojedyncze jony. Ten postęp technologiczny pomoże zastąpić płynne elektrolity, które są zarówno łatwopalne, jak i niestabilne. Projekt przyczyni się do tego, by akumulatory z elektrolitem stałym stały się bezpieczniejsze, tańsze i bardziej niezawodne, a także by ich produkcja była bardziej zrównoważona. Doprowadzi to do większego upowszechnienia pojazdów elektrycznych zasilanych akumulatorami.

Cel

The greatest challenges towards the worldwide success of battery-powered electric vehicles revolve around the safety,
energy density, and cost of the battery technologies. Solid-state polymer electrolytes and lithium metal anode address
these challenges by replacing the flammable and unstable liquid electrolytes and enabling dendrite-free cycling of
high-energy lithium metal cells manufactured by sustainable and cost-effective processing. The PSIONIC project
advances the development of all-solid-state battery technology by employing amorphous cross-linked Polyethylene
oxide (PEO) laminated on the thin lithium foil at the anode and high voltage cathode coated with a single-ion conductive
polymer. This will allow to replace the flammable and unstable liquid electrolytes and enabling dendrite-free cycling
of high-energy lithium metal cells manufactured by sustainable processing. Special attention will be devoted to the
optimization of interfaces between the active material and polymer electrolyte. Materials selection will enable the use
of the manufacturing technology available at BlueSolutions, which is readily scalable, based on sustainable processing
using solvent-free extrusion. PSIONIC is aiming to develop cells with a safety hazard level 2, since no liquid component
will be in the cell at the end of the project.
The research and innovation actions carried under the PSIONIC project will not only just contribute to the technological
advancements of all-solid-state Li-ion batteries in terms of safety, reliability, performance, cost, and sustainability, but
will also enable higher uptake by the electromobility sector and end consumers, paving a pathway towards climate
neutrality, and green energy transition.

Dziedzina nauki (EuroSciVoc)

Słowa kluczowe

Program(-y)

Temat(-y)

System finansowania

HORIZON-RIA - HORIZON Research and Innovation Actions

Wyświetl wszystkie projekty finansowane w ramach tego programu finansowania

Zaproszenie do składania wniosków

(odnośnik otworzy się w nowym oknie) HORIZON-CL5-2021-D2-01

Wyświetl wszystkie projekty finansowane w ramach tego zaproszenia

Koordynator

BLUE SOLUTIONS
Wkład UE netto
€ 1 359 740,00
Adres
ODET
29500 Ergue Gaberic
Francja
Region
Bretagne Bretagne Finistère
Rodzaj działalności
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Linki
Koszt całkowity
€ 1 359 740,00

Uczestnicy (14)

Partnerzy (1)