Gen. 4b Solid State Li-ion battery by additive manufacturing

Projektinformationen

AM4BAT

ID Finanzhilfevereinbarung: 101069756

DOI

10.3030/101069756

Projekt abgeschlossen

EK-Unterschriftsdatum 8 Juni 2022

Startdatum 1 Juli 2022

Enddatum 30 Juni 2026

Finanziert unter

• Climate, Energy and Mobility

Gesamtkosten

€ 4 854 773,75

EU-Beitrag

€ 4 854 773,75

Koordiniert durch

ACONDICIONAMIENTO TARRASENSE ASSOCIACION
Spain

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (6)

Report on HSE paste for rapid prototyping and separator

Delivery of a report describing the formulations prepared to obtain the HSE, the printing process and the results of its characterizations from T3.3.

Post-mortem and safety evaluation

Delivery of a report describing the detail investigation on the degradation mechanism, dendrite formation and safety aspects studied in T6.3.

Report on tailored current collectors for anode-free system

Delivery of a report on the development of artificial SEI and 3D-structured current collectors and its final assessment for T5.1, T5.2 and T5.3.

Recycling study

Delivery of a report describing the feasibility of AM4BAT battery recycling including the results of the experimental study of the different steps (T8.4).

Roadmap for material & manufacturing integration in conventional Li-ion manufacturing line

Delivery of a strategy to integrate the materials and processes developed in the project to the current Liion battery production line This work will be carried out in the T22

Report on interfacial effects at the cathode composite level and their degradation mechanism

Delivery of a report describing the study of the cathode/electrolyte interface carried out in the T4.3. The results of the different characterisations and the conclusions on the developed cathode composites and their performance in the battery will be included.

Veröffentlichungen

Peer reviewed articles (2)

Study of composite polymer electrolytes incorporating LLZO particles in a PEO matrix in high voltage all solid-state lithium batteries

Autoren: Sneha Subhas Malunavar, Susan Montes, Sandra Martinez-Crespiera, Gerard Pérez-Pi, Sonja Tischler, Stefano Passerini, Meisam Hasanpoor
Veröffentlicht in: Energy Advances, Ausgabe 5, 2026, ISSN 2753-1457
Herausgeber: Royal Society of Chemistry (RSC)
DOI: 10.1039/D5YA00355E

Continuous room temperature co-precipitation scale-up toward Zr-doped NMC811 cathode materials

Autoren: ULC
Veröffentlicht in: sciencedirect, ISSN 1873-3212
Herausgeber: sciencedirect
DOI: 10.1016/j.cej.2026.174002

Conference proceedings (8)

Nanomaterials for Li-ion Batteries

Autoren: LEITAT
Herausgeber: Nano materials 2026 conference

3D printing of solid state polymer electrolytes for Li-ion batteries based on designed monomers and additives

Autoren: TOSEDA
Herausgeber: Bordeaux Polymer Conference

Development of 3D metallic nanostructured lithophilic current collector (CC) and a polymeric solid electrolyte for all solid state Li-ion batteries (ASSBs)

Autoren: LEITAT
Herausgeber: Batteries Event 2024

Presentation

Autoren: AIT
Herausgeber: RTR conference

Second Life of Batteries: Modeling Choices in Social Life Cycle Assessment

Autoren: VUB
Herausgeber: SETAC Europe 34th Annual Meeting

Poster: Dispersion-Engineered Carbon Nanofillers and Silver Nanoflakes for Conductive Polymer Electrolyte Enabling 3D Printed Lithium-Battery Cathodes

Autoren: TOSEDA

poster spotlight presentation on early LCA results

Autoren: LEITAT
Herausgeber: SETAC Europe 26th LCA Symposium

Policy event BATRAW

Autoren: VUB
Herausgeber: BATRAW