Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

Distributed multiport converters for integration of renewables, storage systems and loads while enhancing performance and resiliency of modern distributed networks

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Validation report of LV converter (si apre in una nuova finestra)

The deliverable will consist of a comprehensive report on the experimental validations of the proposed solutions, as reported in D3.1. A set of experimental prototypes will be developed to validate the effectiveness of the proposed solutions and the report will include the validation performed. From the control point of view, rapid prototyping solutions based on Imperix half/full/NPC bricks and Bombox controllers will be adopted. Instead, from the converter topology point of view, the most promising solutions will be implemented with state-of-art technology at the laboratory level. The report will include the static and dynamic performance of the proposed solution under different operating conditions.

Case study description report (si apre in una nuova finestra)

Report describing the results of the case studies conducted in Task 1.5 for the selected cases defined in WP1. The report will include quantitative results and also a discussion on the results obtained

Overall requirements, specifications, KPI definitions and use case definition (si apre in una nuova finestra)

The deliverable D1.1 will contain a description of the requirements for grid-connected multiport converters obtained based on present and future grid codes and a detailed explanation of the KPI that will be used to evaluate and compare the designed multiport converters. Also, the different study cases will be presented, including the general electric parameters and real-life recorded time-series of load and generation profiles.

System level modelling and control report (si apre in una nuova finestra)

This report provides a detailed explanation of the electrical models developed with the integration of multiport converters. In addition, the description and justification of advanced coordinated controllers of the multiports will be given. Finally, simulation results for the different controls applied to service provision and grid quality will be given and compared to the base case without multiports.

Comparison and experimental validation report (si apre in una nuova finestra)

This deliverable details the ranking of the various multiport converter configuration solutions in terms of scalability, footprint, dc-side integration capability, dynamic performance as well as efficiency. In addition, the theoretical findings will be verified through laboratory tests.

Modelling and control report (LV converter) report (si apre in una nuova finestra)

The deliverable will consist of a comprehensive report that will include the analysis and comparison of different topologies for LV multiport converters also using SiC/Gan power devices. The report will also describe the research on the development of switching loss models by means of experimental verifications on double-pulse circuits or suitable circuits. Moreover, the advances in terms of advanced modulation to ensure ZVS under different operating conditions will be also reported. Finally, the research will be also related to controlling of high-bandwidth current/voltage regulations and the achievement of passivity of the input impedance in the whole frequency range.

Project Management Plan (si apre in una nuova finestra)

This deliverable sets out the iPLUG project management plan. The plan covers all processes and links the responsibilities at both person and partner level to assure the generation of high-quality deliverables aligned with the project plan as described in the Action Description. It will be reviewed through the project, particularly before the end of the first reporting period and the end of the second reporting period.

Data Management Plan (si apre in una nuova finestra)

The Management Plan (DMP) outlines the procedures employed in the project for the treatment of data throughout and upon project completion, addresses which type of data will be gathered, processed and extracted, establishes which methodology and standards will be applied whilst compiling and treating data, and develops processes for the sharing of data and open access of iPLUG data. Moreover, it details the proceedings with regard to the General Data Protection Regulation (GDPR) and describes the ways in which iPLUG guarantees the data protection, information and privacy rights of the organisations. The DMP is a living document which is updated as project execution moves forward and as significant modifications are undertaken.

Modelling and control report (MV converter) report (si apre in una nuova finestra)

This deliverable details the modeling and control of multiport converter solutions in MV application and validation of the system performance. Various solutions based on Isolated, non-isolated and hybrid converter topologies will be modelled and their performance is validated.

KPI evaluation, Environmental and techno-economic analysis, conclusions and next steps (si apre in una nuova finestra)

This deliverable is responsible for developing the evaluation of the KPIs defined on the project to validate the level of achievement of the project with its goals. Additionally, it will include the evaluation of LCA and Cost analysis of the technologies to be compared with base cases. Finally, general conclusions, guidelines, roadmap and recommendations for further developments of the disruptive multiport converters will be provided.

Final Management Report (si apre in una nuova finestra)

Final report summarizing all the management activities of the project

System optimization reports and scripts (si apre in una nuova finestra)

The deliverable provides a report explaining the optimization methodology followed to optimize sizing and location with (or without) consideration of resiliency. The relevant scripts are also included with documentation justifying models and describing assumptions done.

Lab-scale validation results (si apre in una nuova finestra)

This deliverable provides the results obtained through lab-scale validation of the integration of multiports into the different grids. The objective is to gather the data and results to compare them with the simulations developed early. In addition to a report, some data obtained during the simulations and the experimental testing will be made available.

Dissemination and Exploitation report (si apre in una nuova finestra)

The iPLUG Dissemination and Exploitation report outlines the actions that will be undertaken, and the distribution means that will be employed to disseminate the project as well as its results, including the exploitation of the project's results.

Intermediate Management Report (si apre in una nuova finestra)

Intermediate summary of the activities carried out by each partner. It will include a Project Management Handbook (Definition of the meetings, representatives of each partner and WP leaders, internal communication strategy and risk and contingency plan), Data and Knowledge Management plan (Definition of the items that are subjected to intellectual property and the procedures to exchange information among the partners. Updates will be informed during project reports) and Gender Equality Action plan (On the considered features of the iPLUG technology that must be considered from a gender perspective and how these are addressed)

Pubblicazioni

Model-Free Optimization of Isolated DC-DC Triple Active Bridge Converters for ZVS and Reduced RMS Current Operation (si apre in una nuova finestra)

Autori: Ahmed A. Ibrahim, Tommaso Caldognetto, Davide Biadene, Paolo Mattavelli
Pubblicato in: 2024 IEEE Energy Conversion Congress and Exposition (ECCE), 2024
Editore: IEEE
DOI: 10.1109/ECCE55643.2024.10861199

Asymmetric Multiport Y-Converter for Three-Phase AC Grid Integration with DC Microgrids (si apre in una nuova finestra)

Autori: Ahmed Y. Farag, Davide Biadene, Tommaso Caldognetto, Paolo Mattavelli
Pubblicato in: 2024 Energy Conversion Congress & Expo Europe (ECCE Europe), 2024
Editore: IEEE
DOI: 10.1109/ECCEEUROPE62508.2024.10751945

Multiport Y-Converter for Three-Phase AC Grid Integration with DC Systems (si apre in una nuova finestra)

Autori: Ahmed Y. Farag, Davide Biadene, Tommaso Caldognetto, Paolo Mattavelli
Pubblicato in: 2024 IEEE 15th International Symposium on Power Electronics for Distributed Generation Systems (PEDG), 2024, ISSN 2329-5767
Editore: IEEE
DOI: 10.1109/PEDG61800.2024.10667378

Control Strategy for a Triple Active Bridge Converter: a Generalized Average Model Approach (si apre in una nuova finestra)

Autori: A.C. Henao, A. Pepiciello, J.L. Domínguez-García
Pubblicato in: Proceedings of 2023 IEEE PES Innovative Smart Grid Technologies Conference Europe
Editore: IEEE
DOI: 10.1109/ISGTEUROPE56780.2023.10408694

Fault Ride Through Control of Multiport Converter for Distribution Grids (si apre in una nuova finestra)

Autori: M. Domínguez-Hernàndez, O. Esquius-Mas, M. Cheah-Mane, E. Prieto-Araujo, O. Gomis-Bellmunt
Pubblicato in: Proceedings of 2022 IEEE PES Innovative Smart Grid Technologies Conference Europe, ISBN 978-1-6654-8032-1
Editore: IEEE
DOI: 10.1109/ISGT-EUROPE5467

Analysis of Low Voltage Ride Through Capability in Multiport Converters for Soft Open Point Applications (si apre in una nuova finestra)

Autori: K. A. A. Mohammed, P. Mattavelli, T. Caldognetto, D. Biadene, P. Magnone
Pubblicato in: Lecture Notes in Electrical Engineering, ELECTRIMACS 2024, 2024, ISBN 978-3-031-73921-7
Editore: Springer Nature Switzerland
DOI: 10.1007/978-3-031-73921-7_10

GIS-based approach to improve the resilience of the distribution network (si apre in una nuova finestra)

Autori: Montserrat Montalà-Palau, Marc Cheah Mañé, Oriol Gomis-Bellmunt
Pubblicato in: IET Conference Proceedings, Numero 2024, 2025, ISSN 2732-4494
Editore: Institution of Engineering and Technology (IET)
DOI: 10.1049/ICP.2024.2582

Multiport power converters to enhance resilience in distribution networks (si apre in una nuova finestra)

Autori: Martí Domínguez-Hernandez, Marc Cheah-Mañé, Robert Griñó, Oriol Gomis-Bellmunt
Pubblicato in: IET Conference Proceedings, Numero 2024, 2024, ISSN 2732-4494
Editore: Institution of Engineering and Technology (IET)
DOI: 10.1049/ICP.2024.2581

On the Applicability of SISO and MIMO Impedance-Based Stability Assessment of DC–DC Interlinking Converters (si apre in una nuova finestra)

Autori: Ružica Cvetanović, Ivan Z. Petrić, Paolo Mattavelli, Simone Buso
Pubblicato in: IEEE Transactions on Power Electronics, Numero 39, 2024, ISSN 0885-8993
Editore: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/TPEL.2024.3403236

Resilient features of a grid-forming multiport power converter (si apre in una nuova finestra)

Autori: Sam Harrison, Mebtu Beza, Agustí Egea Alvarez
Pubblicato in: IET Conference Proceedings, Numero 2024, 2025, ISSN 2732-4494
Editore: Institution of Engineering and Technology (IET)
DOI: 10.1049/ICP.2024.2603

All-Port MIMO Admittance Passivity for Robust Stability of DC–DC Interlinking Converters (si apre in una nuova finestra)

Autori: Ružica Cvetanović, Ivan Z. Petrić, Paolo Mattavelli, Simone Buso
Pubblicato in: IEEE Transactions on Power Electronics, Numero 39, 2024, ISSN 0885-8993
Editore: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/TPEL.2024.3430560

State Space Modeling and Small-Signal Stability Analysis of a Multiport Soft Open Point Based on the Triple Active Bridge Converter (si apre in una nuova finestra)

Autori: Andrés Camilo Henao-Muñoz, Antonio Pepiciello, Mohammed Debbat, Andrés Tarrasó, José Luis Domínguez-García
Pubblicato in: 2024 International Conference on Smart Energy Systems and Technologies (SEST), 2024, ISSN 2836-4678
Editore: IEEE
DOI: 10.1109/SEST61601.2024.10694463

Enhancing DC microgrids integration with three-phase AC grids using multiport converters (si apre in una nuova finestra)

Autori: Ahmed Y. Farag, Davide Biadene, Tommaso Caldognetto, Paolo Mattavelli
Pubblicato in: IET Conference Proceedings, Numero 2024, 2024, ISSN 2732-4494
Editore: Institution of Engineering and Technology (IET)
DOI: 10.1049/ICP.2024.2162

Multiport converter design and optimal location in distribution grids (si apre in una nuova finestra)

Autori: Paula Muñoz-Peña, Marc Cheah-Mane, Eduardo Prieto-Araujo, Oriol Gomis-Bellmunt
Pubblicato in: IET Conference Proceedings, Numero 2024, 2025, ISSN 2732-4494
Editore: Institution of Engineering and Technology (IET)
DOI: 10.1049/ICP.2024.1949

Three-Phase Four-Wire Step-Down Modular Converter for an Enhanced Interlinking in Low-Voltage Hybrid AC/DC Microgrids (si apre in una nuova finestra)

Autori: Ahmed Y. Farag, Davide Biadene, Paolo Mattavelli, Tarek Younis
Pubblicato in: IEEE Open Journal of Power Electronics, Numero 5, 2024, ISSN 2644-1314
Editore: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/OJPEL.2024.3394548

Review of multiport power converters for distribution network applications (si apre in una nuova finestra)

Autori: Sam Harrison, Bartosz Soltoswski, Antonio Pepiciello, Andres Camilo Henao, Ahmed Y. Farag, Mebtu Beza, Lie Xu, Agustí Egea-Àlvarez, Marc Cheah-Mañé, Oriol Gomis-Bellmunt
Pubblicato in: Renewable and Sustainable Energy Reviews, Numero 203, 2024, ISSN 1364-0321
Editore: Elsevier BV
DOI: 10.1016/J.RSER.2024.114742

EMI-Silent Operation of Triple Active Bridge Converters With Online Model-Free ZVS Optimization and RMS Current Reduction (si apre in una nuova finestra)

Autori: Ahmed A. Ibrahim, Michele Darisi, Tommaso Caldognetto, Davide Biadene, Paolo Magnone, Paolo Mattavelli
Pubblicato in: IEEE Open Journal of Industry Applications, Numero 6, 2025, ISSN 2644-1241
Editore: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/OJIA.2025.3565905

Multiport converter evaluation for high penetration of renewable generation in distribution grids (si apre in una nuova finestra)

Autori: Paula Muñoz-Peña, Marc Cheah-Mane, Oriol Gomis-Bellmunt, Eduardo Prieto-Araujo
Pubblicato in: International Journal of Electrical Power & Energy Systems, Numero 161, 2024, ISSN 0142-0615
Editore: Elsevier BV
DOI: 10.1016/J.IJEPES.2024.110211

Single-Stage Non-Isolated Multiport Y-Converter for Interlinking 400 V DC Microgrids With the Three-Phase AC Grid (si apre in una nuova finestra)

Autori: Ahmed Y. Farag, Davide Biadene, Tommaso Caldognetto, Paolo Mattavelli
Pubblicato in: IEEE Open Journal of Power Electronics, Numero 5, 2024, ISSN 2644-1314
Editore: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/OJPEL.2024.3462773

Three-phase Four-wire Bidirectional Y converter for an Enhanced Interface between the AC Grid and the Unipolar DC Microgrid (si apre in una nuova finestra)

Autori: Ahmed Y. Farag, Davide Biadene, Paolo Mattavelli, Tarek Younis
Pubblicato in: Proceedings of the 8th IEEE Workshop on the Electronic Grid (eGrid 2023), ISSN 2831-3658
Editore: IEEE
DOI: 10.1109/EGRID58358.2023.10380894

Distributed multiport converters for renewable energy integration

Autori: M. Solagran-Jufré, P. Muñoz-Peña, O. Gomis-Bellmunt
Editore: UPC/ZENODO

Design and operation of multiport converters for distribution systems

Autori: P. Muñoz-Peña, M. Cheah-Mane, O. Gomis-Bellmunt
Editore: UPC/Zenodo

Advanced Bidirectional Three-Phase Power Factor correctors (PFC) for DC Microgrids

Autori: A. Y. Farag,
Editore: UNIPD

Data analysis and evaluation of multiport converter optimization in different scenarios (si apre in una nuova finestra)

Autori: J. Perez-Noguera, P. Muñoz-Peña, M. Cheah-Mane
Pubblicato in: 2025
Editore: IEE
DOI: 10.5281/ZENODO.14803754

Positive and Negative sequence analysis of a Voltage Source Converter

Autori: M. Domínguez-Hernàndez, M. Cheah-Mane, R. Griñó-Cubero
Editore: UPC/Zenodo

È in corso la ricerca di dati su OpenAIRE...

Si è verificato un errore durante la ricerca dei dati su OpenAIRE

Nessun risultato disponibile

Il mio fascicolo 0 0