Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch Deutsch
CORDIS - Forschungsergebnisse der EU
CORDIS

Exploring wooden materials in hybrid printed electronics: a holistic approach towards functional electronics with net zero carbon emissions

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Life cycle assessment versus GHG protocol for scope 3 emissions: better path to net zero? (öffnet in neuem Fenster)

The objective is to compare the overlaps and deviations between the two prominent methodologies to calculate CO2 emissions: GHG protocol and LCA. An additional aim is to explore the possibility of utilizing current LCA databased within the framework of GHG protocol to facilitate computations of CO2 emissions.

Communication and dissemination plan including networking activities (öffnet in neuem Fenster)

A communication and dissemination plan will define the roles & responsibilities of partners and the conditions, in relation to confidentiality, to ensure adequate dissemination (e.g. attendance to conference and publication) and use of the knowledge.

Data Management Plan (DMP) (öffnet in neuem Fenster)

This deliverable will describe the data, generated and/or collected during the project and how these will be managed. The DMP will be created using guidance provided by the EU. This will be kept as a working document.

Veröffentlichungen

Organosolv biorefinery: resource-based process optimisation, pilot technology scale-up and economics (öffnet in neuem Fenster)

Autoren: Giorgio Tofani, Edita Jasiukaitytė-Grojzdek, Miha Grilc Blaž Likozar
Veröffentlicht in: Green Chemistry, Ausgabe Green Chem., 2024,26, 186-201, 2023, ISSN 1463-9270
Herausgeber: rsc
DOI: 10.1039/D3GC03274D

Unraveling the climate neutrality of wood derivatives and biopolymers (öffnet in neuem Fenster)

Autoren: Akshat Sudheshwar, Kealie Vogel, Gustav Nyström, Nadia Malinverno, Monica Arnaudo, Carlos Enrique Gómez Camacho, Didier Beloin-Saint-Pierre, Roland Hischier and Claudia Som
Veröffentlicht in: RSC Sustainability, Ausgabe 2, 1487-1497, 2024, ISSN 2753-8125
Herausgeber: RSC
DOI: 10.1039/D4SU00010B

Lignin-Based Covalent Adaptable Network Polymers─When Bio-Based Thermosets Meet Recyclable by Design (öffnet in neuem Fenster)

Autoren: Tiz, Davide Benedetto; Vicente, Filipa A.; Kroflič, Ana; Likozar, Blaž
Veröffentlicht in: ACS sustainable chemistry & engineering, str. 13836–13867 : Ilustr., Vol. 11, iss. 38, Sep. 25, 2023, Ausgabe ACS Sustainable Chem. Eng. 2023, 11, 38, 13836–13867, 2023, ISSN 2168-0485
Herausgeber: American Chemical Society
DOI: 10.1021/acssuschemeng.3c03248

Chemical Synthesis of Monolignols: Traditional Methods, Recent Advances, and Future Challenges in Sustainable Processes (öffnet in neuem Fenster)

Autoren: Davide Benedetto Tiz, Giorgio Tofani, Filipa A. Vicente, Blaž Likozar
Veröffentlicht in: Antioxidants, Ausgabe 13, 2025, ISSN 2076-3921
Herausgeber: MDPI AG
DOI: 10.3390/ANTIOX13111387

Colloids and Surfaces A: Physicochemical and Engineering Aspects (öffnet in neuem Fenster)

Autoren: Carlos Díaz-Ufano , María del Puerto Morales , Sabino Veintemillas-Verdaguer
Veröffentlicht in: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Ausgabe 698 (2024) 134604, 2024, ISSN 0927-7757
Herausgeber: Elsevier BV
DOI: 10.1016/j.colsurfa.2024.134604

Alternative Metallic Fillers for the Preparation of Conductive Nanoinks for Sustainable Electronics (öffnet in neuem Fenster)

Autoren: Belén Corrales‐Pérez; Carlos Díaz‐Ufano; María Salvador; Antonio Santana‐Otero; Sabino Veintemillas‐Verdaguer; Valerio Beni; María del Puerto Morales
Veröffentlicht in: Advanced Functional Materials, 2024, ISSN 1616-3028
Herausgeber: wiley Advanced
DOI: 10.1002/ADFM.202405326

Defining and Achieving Next-Generation Green Electronics: A Perspective on Best Practices Through the Lens of Hybrid Printed Electronics (öffnet in neuem Fenster)

Autoren: Kealie Vogel, Sara Carniello, Valerio Beni, Akshat Sudheshwar, Nadia Malinverno, Yolanda Alesanco, Max Torrellas, Stephan Harkema, Margreet De Kok, Corné Rentrop, Ignacio Zurano Villasuso, Lou Bernard, Enrique Moliner, Christian Rein, Yves Bayon, Zulfiqur Ali, Carolin Zachäus, Nicolas Gouze, Marie Berthuel, Cristina González Buch, Fruela Pérez Sánchez, Claudia Som
Veröffentlicht in: IEEE Access, Ausgabe 13, 2025, ISSN 2169-3536
Herausgeber: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/ACCESS.2025.3585340

Printed circuit board substrates derived from lignocellulose nanofibrils for sustainable electronics applications (öffnet in neuem Fenster)

Autoren: Yuliia Dudnyk, Pavel Kulha, Václav Procházka, Gustav Nyström, Thomas Geiger
Veröffentlicht in: Scientific Reports, Ausgabe 15, 2025, ISSN 2045-2322
Herausgeber: Springer Science and Business Media LLC
DOI: 10.1038/S41598-025-91653-1

Copper-Based Conductive Nanoinks: Scalable Synthesis via Continuous-Flow Microwave-Assisted Polyol Process (öffnet in neuem Fenster)

Autoren: Antonio Santana-Otero, Yilian Fernández-Afonso, María Salvador, André Van Zomeren, Salvador Bertran-Llorens, María del Puerto Morales, Sabino Veintemillas-Verdaguer
Veröffentlicht in: Energy & Environmental Materials, 2024, ISSN 2575-0356
Herausgeber: Wiley
DOI: 10.1002/EEM2.70164

Advanced Functional Materials (öffnet in neuem Fenster)

Autoren: Belén Corrales-Pérez, Carlos Díaz-Ufano, María Salvador, Antonio Santana-Otero, Sabino Veintemillas-Verdaguer, Valerio Beni, and María del Puerto Morales
Veröffentlicht in: Advanced Functional Materials, Ausgabe 2405326, 2024, ISSN 1616-301X
Herausgeber: Wiley-VCH GmbH
DOI: 10.1002/adfm.202405326

Colloids and Surfaces A: Physicochemical and Engineering Aspects (öffnet in neuem Fenster)

Autoren: Díaz-Ufano, Carlos; Morales, María del Puerto; Veintemillas-Verdaguer, Sabino
Veröffentlicht in: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, ISSN 0927-7757
Herausgeber: Elsevier BV
DOI: 10.1016/J.COLSURFA.2024.134604

Biorefining Twin Transition: Digitalisation for Bio-based Chemicals/Materials - Discovery, Design and Optimisation (öffnet in neuem Fenster)

Autoren: Žula, Matej; Grilc, Miha; Kostyniuk, Andrii; Tofani, Giorgio; Jasiukaityte, Edita; Ročnik, Tina; Chowdari, Ramesh Kumar; Lavrič, Žan; Teržan, Janvit; Hočevar, Brigita; Jakob, Ana; Rakić, Emilija; Pomeroy, Brett; Cajnko, Miša Mojca; Vicente, Filipa A.; Marinič, Dana; Oberlintner, Ana; Novak, Uroš; Benedetto Tiz, Davide; Huš, Matej; Likozar, Blaž
Veröffentlicht in: Chimia, Ausgabe Vol. 77, no. 12, 2023, ISSN 0009-4293
Herausgeber: Schweizerische Chemische Gedellschaft
DOI: 10.2533/chimia.2023.816

Exploring the possibilities of LLMs in environmental regulatory compliance - A grounded theory study of LLM use in the HyPELignum project

Autoren: Makdessi, Alice; Quintero Pinto, Valentina
Veröffentlicht in: 2025
Herausgeber: Gothenburg university

Assessing the innovation readiness level of technologies: a new framework

Autoren: Anna Bisogni
Veröffentlicht in: 2024
Herausgeber: Politecnico di Milano

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor

Mein Booklet 0 0