OPEN INNOVATION PLATFORM FOR OPTIMISING PRODUCTION SYSTEMS BY COMBINING PRODUCT DEVELOPMENT, VIRTUAL ENGINEERING WORKFLOWS AND PRODUCTION DATA

Informazioni relative al progetto

PIONEER

ID dell’accordo di sovvenzione: 101091449

DOI

10.3030/101091449

Progetto chiuso

Data della firma CE 28 Novembre 2022

Data di avvio 1 Gennaio 2023

Data di completamento 31 Dicembre 2025

Finanziato da

• Digital, Industry and Space

Costo totale

€ 5 188 829,09

Contributo UE

€ 4 415 708,74

Coordinato da

ASOCIACION DE INVESTIGACION METALURGICA DEL NOROESTE
Spain

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (5)

Dissemination and Communication Plan (M36 update)

It comprises objectives, toolkit and planned activities, identifying audiences and the key message to meet the defined objectives. (M36 update)

Interoperable open data formats

for data exchange along the material value chain

Dissemination and Communication Plan (M18 update)

It comprises objectives, toolkit and planned activities, identifying audiences and the key message to meet the defined objectives. (M18 update)

Best-practice handbook

Developing information, assessment and scouting for best practices recommendations.

Dissemination and Communication Plan

It comprises objectives, toolkit and planned activities, identifying audiences and the key message to meet the defined objectives

Data sets, microdata, etc (3)

MODA and CHADA schemes

as standardised documentation procedure of simulation and material characterization.

Generation of material characterisation data

It provides material characterisation data for use in CAx workflow.

PIONEER datasets for LCA benchmarking

Public datasets with data, LCA outputs and routings for benchmarking purposes.

Other (6)

Open innovation platform

interoperable service-oriented architecture

System of ontologies

It supports interoperability between materials science and production.

AAS data models

Data models for specifying the manufacturing Digital Twins

Digital pipeline scheme

It describes the digital thread and orchestrator needed for a continuous evolution of the product being manufactured.

Multi-sided marketplace and PIONEER offering

It is a final marketplace available for customers and the initial PIONEER offering for them

Industrial-driven demonstrators commissioned

It describes the layout of the PIONEER demonstrators.

Demonstrators, pilots, prototypes (3)

SMC demonstrator

Demonstrator for high-mix production scheme

WAAM demonstrator

Demonstrator for low-volume production scheme.

Open Research Labs for adopting design-by-simulation concept

It contains openly accessible technologies for interested parties

Pubblicazioni

Peer reviewed articles (6)

Hybrid construction featuring wire arc additive manufacturing: review, concepts, challenges and opportunities

Autori: Xin Meng, Leroy Gardner
Pubblicato in: Engineering Structures, Numero 326, 2025, ISSN 0141-0296
Editore: Elsevier BV
DOI: 10.1016/J.ENGSTRUCT.2024.119337

Machine learning-boosted nonlinear homogenization

Autori: Mikhael Tannous, Chady Ghnatios, Olivier Castelnau, Pedro Ponte Castañeda, Francisco Chinesta
Pubblicato in: Mechanics of Materials, Numero 201, 2025, ISSN 0167-6636
Editore: Elsevier BV
DOI: 10.1016/J.MECHMAT.2024.105229

Hybrid tubular joints featuring topology-optimised DED-Arc nodes

Autori: Minze Zhang, Xin Meng, Wenxuan Hong, Pinelopi Kyvelou, Leroy Gardner
Pubblicato in: Thin-Walled Structures, 2025, ISSN 0263-8231
Editore: Elsevier BV
DOI: 10.1016/J.TWS.2025.114298

Strengthening of hot-rolled S355 steel I-section beams using WAAM high strength steel

Autori: Jiachi Yang, M. Ahmer Wadee, Leroy Gardner
Pubblicato in: Thin-Walled Structures, Numero 215, 2025, ISSN 0263-8231
Editore: Elsevier BV
DOI: 10.1016/J.TWS.2025.113437

Integrating simulation and machine learning for accurate preform charge prediction in Sheet Molding Compound manufacturing

Autori: Mikhael Tannous, Sebastian Rodriguez, Chady Ghnatios, Francisco Chinesta
Pubblicato in: International Journal of Material Forming, Numero 18, 2025, ISSN 1960-6206
Editore: Springer Science and Business Media LLC
DOI: 10.1007/S12289-025-01878-8

Reference geometries and indicators for the process window development of wire Directed Energy Deposition

Autori: Konstantinos Tzimanis, Nikolas Porevopoulos, Nikolas Bourlesas, Panagiotis Stavropoulos
Pubblicato in: Procedia CIRP, Numero 132, 2025, ISSN 2212-8271
Editore: Elsevier BV
DOI: 10.1016/J.PROCIR.2025.01.016

Conference proceedings (2)

Reduced Order Modeling (ROM) Equipped with Random Forest for Structural Dynamics Analysis

Autori: Minyoung Yun, Mikhael Tannous, Chady Ghnatios, Trond Kvamsdal, Francisco Chinesta
Pubblicato in: 10th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 2025
Editore: Compdyn 2025 Proceedings
DOI: 10.5281/ZENODO.17937000

Digital Pipeline Linking Material, Engineering and Manufacturing Data

Autori: M. Morandeira, F. Gilardi, A. Abadía, D. Fernández and L. Alonso
Pubblicato in: 5th IFSA Winter Conference on Automation, Robotics & Communications for Industry 4.0/5.0 (ARCI' 2025) 19-21 February 2025, Granada, Spain, 2025
Editore: IFSA Publishing
DOI: 10.13140/RG.2.2.13085.63208