European Commission logo
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS

Modular HEATing Technology through renewable resources for steel production

Description du projet

Une technologie de chauffage hybride pour décarboner l’industrie sidérurgique

La production d’acier en aval repose sur l’utilisation de combustibles fossiles, ce qui a des répercussions importantes sur l’environnement. Il est essentiel de trouver de nouveaux moyens de les réduire. Les fours de réchauffage, qui fonctionnent actuellement avec des brûleurs au CH4, émettent des niveaux élevés de CO2. Le projet ModHEATech, financé par l’UE, vise à décarboner le chauffage industriel en introduisant une technologie hybride combinant l’électrification et la combustion de gaz. Cette solution associe différentes technologies par le biais du «chauffage hybride» afin d’améliorer l’efficacité. Elle recourt aux effluents gazeux du four pour récupérer l’enthalpie et électrifie partiellement le four à l’aide d’un système d’induction. L’électricité nécessaire pour alimenter l’inducteur sera fournie par une source d’énergie renouvelable (SER) et un système de récupération de chaleur.

Objectif

Nowadays the overall energy demand in downstream steel production is mainly based on fossil fuel, so it is fundamental to find and set new ways to overcome the environmental impact of steel production
Currently, the state-of-art of reheating furnaces is based on CH4 burners, with an evident environmental impact on CO2 emissions
The main objective is to decarbonize this process, based on the introduction of hybrid heating technology, based on electrification and gas-burning properly combined. This solution provides an opportunity to explore the synergic effect of different technologies, by “hybrid heating”. Moreover, the whole efficiency of the heating process can be furtherly improved by the recovery of enthalpy content of off-gases from the furnace. The furnace partial electrification will be realized by the installation of an induction system. The electricity to feed the inductor will be provided by a renewable source (RES) and by the heat recovery system.

Mots‑clés

Coordinateur

RINA CONSULTING - CENTRO SVILUPPO MATERIALI SPA
Contribution nette de l'UE
€ 1 111 950,00
Adresse
VIA DI CASTEL ROMANO 100
00128 Roma
Italie

Voir sur la carte

Région
Centro (IT) Lazio Roma
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total
€ 1 853 250,00

Participants (5)