European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Modular HEATing Technology through renewable resources for steel production

Descripción del proyecto

Tecnología de calefacción híbrida para descarbonizar la siderurgia

La producción de acero se basa en combustibles fósiles, lo que tiene importantes repercusiones en el medio ambiente. Encontrar nuevas formas de reducirlo es crucial. Los hornos de recalentamiento, que actualmente utilizan quemadores de CH4, emiten altos niveles de CO2. El equipo del proyecto ModHEATech, financiado con fondos europeos, pretende descarbonizar la calefacción industrial introduciendo una tecnología híbrida que combine la electrificación y la combustión de gas. Esta solución combina distintas tecnologías a través de la «calefacción híbrida» para mejorar la eficiencia. Utiliza los gases de escape del horno para recuperar entalpía y electrifica parcialmente el horno con un sistema de inducción. La electricidad necesaria para alimentar el inductor será suministrada por una fuente de energía renovable y un sistema de recuperación de calor.

Objetivo

Nowadays the overall energy demand in downstream steel production is mainly based on fossil fuel, so it is fundamental to find and set new ways to overcome the environmental impact of steel production
Currently, the state-of-art of reheating furnaces is based on CH4 burners, with an evident environmental impact on CO2 emissions
The main objective is to decarbonize this process, based on the introduction of hybrid heating technology, based on electrification and gas-burning properly combined. This solution provides an opportunity to explore the synergic effect of different technologies, by “hybrid heating”. Moreover, the whole efficiency of the heating process can be furtherly improved by the recovery of enthalpy content of off-gases from the furnace. The furnace partial electrification will be realized by the installation of an induction system. The electricity to feed the inductor will be provided by a renewable source (RES) and by the heat recovery system.

Palabras clave

Coordinador

RINA CONSULTING - CENTRO SVILUPPO MATERIALI SPA
Aportación neta de la UEn
€ 1 111 950,00
Dirección
VIA DI CASTEL ROMANO 100
00128 Roma
Italia

Ver en el mapa

Región
Centro (IT) Lazio Roma
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total
€ 1 853 250,00

Participantes (5)