CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.
Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .
Livrables
A procedure describing the strategy to extract and recover the magnets from end-of-life motors. Associated to task 2.2
Modular, high-efficient and cost-oriented 800V powertrain architecture (s’ouvre dans une nouvelle fenêtre)Definition of the modular, high-efficient and cost-oriented 800V powertrain architecture. Associated to task 3.1
Analysis and validation of machine insulation for 800V DC bus (s’ouvre dans une nouvelle fenêtre)The report will describe the performance of an innovative slot molding (a replacement for liners with improved thermal conductivity) and the final decision about the insulation system to be used in the HEFT machine. Associated to task 2.4
Market need analysis (s’ouvre dans une nouvelle fenêtre)Report stating the current EV market demand for e-powertrain units. The report will consider technical needs as well as economic requirements and regulations boundary conditions. Associated to tasks 1.1, 4.1 and 4.2
Validation plan (s’ouvre dans une nouvelle fenêtre)A validation plan which includes a test matrix describing the test to be performed to assess the predefined requirements. Associated to task 1.3
Initial plan for use and dissemination of foreground (s’ouvre dans une nouvelle fenêtre)Tentative plan describing the type and timing of dissemination activities The plan will be updated based on contingencies or opportunities Associated to task 72
Electromagnetic and performance Design report of motor for class A+B vehicle (s’ouvre dans une nouvelle fenêtre)Design of eMotor active part for class A+B vehicle. Design to minimize magnet volume and reducing iron losses, based on recycled NdFeB and /or NdCeFeB magnets.Report showing the design process of the rotor. The report should include study of the most convenient rotor topology using recycled NdFeB or NdCeFeB magnets with the use of high strength over moulded epoxy. In addition, it should include the resistance of the rotor to demagnetisation and the incorporation on the rotor of the appropriate cooling circuit. The report should include the optimisation process to reduce iron and magnet losses and improve efficiency over the WLTP driving cycle. Associated to task 4.1
Electromagnetic and performance Design report of motor for class C+D+E vehicle (s’ouvre dans une nouvelle fenêtre)Design of eMotor active part for class C+D+E vehicle. Design to minimize magnet volume and reducing iron losses, based on NdFeB magnets, facilitating the magnets re-use. Report showing the design process of the rotor. The report should include study of the most convenient rotor topology. As an initial approach N42UH/SH magnet will be used, however it should be seen how through the design process of the magnetic and cooling circuit the magnet grade is reduced, to incorporate lower amount of rare-earth material. In addition, it should include the resistance of the rotor to demagnetisation and the incorporation on the rotor of the appropriate cooling circuit. The report should include the optimisation process to reduce iron and magnet losses and improve efficiency over the WLTP driving cycle. Associated to task 4.1
Improved SiC-based high voltage drive control (s’ouvre dans une nouvelle fenêtre)Improved SiC-based high voltage drive control to reduce powertrain losses and improve EV range. Associated to task 3.2
The list of stakeholders and end-users will be updated after an internal exchange. Financial planning and resources for the execution of CD&E will be defined. Associated to task 7.2
Project website (s’ouvre dans une nouvelle fenêtre)The website will report the aim of the project, the consortium, updates regarding meetings, dissemination activities, information of public domain and will be used also in conjunction with social media profiles (e.g., LinkedIn). Associated to task 7.2
Publications
Auteurs:
Fatemeh Taheri, Karel Van Acker
Publié dans:
Flander Make conference, 2024
Éditeur:
Flander Make
Auteurs:
Marta Marijuan, Iago Martinez & Fernando Garramiola
Publié dans:
2023 13th International Electric Drives Production Conference (EDPC), Regensburg, Germany, 2023, ISBN 979-8-3503-7049-2
Éditeur:
IEEE
DOI:
10.1109/EDPC60603.2023.10372165
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible