Design, manufacturing, and validation of ecocycle electric traction motor

Risultati finali

Report of demanded load cycle, highlighting the most frequent operating range of light-duty vehicle sector

Report on the motor demanded load cycle based on the WLTP driving cycle and typical light-duty vehicle operations. D4.2 is connected with T4.1.

Report on motor recycling and repurposing chains

Assessment of different rare earth magnetic material and component recycling and repurposing chains, including evaluation different second life scenarios and methods to improve circularity. This deliverable is a result of T3.2.

Preliminary motor specifications

Report on the preliminary motor specifications agreed with whole consortium. D4.1 is connected with T4.1.

Plan for dissemination, communication, networking and exploitation activities

A detailed ‘plan for dissemination and exploitation including communication activities’ provided as a mandatory project deliverable within 6 months after the project start. Reports the results from T7.1-T7.4.

Pubblicazioni

Impact of Conductive Airgap Sleeve on Parasitic Capacitances and Bearing Current Risk in a High-Specific-Power Hairpin-Winding Traction Machine

Autori: Konstantin Vostrov, Ilya Petrov, Juha Pyrhönen
Pubblicato in: 2026 IEEE 22nd International Power Electronics and Motion Control Conference (PEMC), 2026
Editore: IEEE
DOI: 10.1109/PEMC69244.2026.11726039

THE ASSESSMENT OF THE OPERATIONAL RELIABILITY OF BRUSH-COLLECTOR UNITS OF AIRCRAFT ELECTRICAL EQUIPMENT AND RECOMMENDATIONS FOR THEIR IMPROVEMENT

Autori: Mykhaylo ZAGIRNYAK1, Volodymyr DRAHOBETSKYI2, Dmytro MOLOSHTAN3, Alyona NIKITINA4, Damijan MILJAVEC5
Editore: PTZE 2026 XXXV International Symposium on Applied Electromagnetics on 13-16 September 2026

Hairpin Winding with Direct Oil Cooling

Autori: Ilya Petrov; Iikka Martikainen; Ilkka Poutiainen; Juzer Rangwala; Juha Pyrhönen
Pubblicato in: ICEM 2024, we are working to make this publication open access as it should be, ISSN 2473-2087
Editore: IEEE
DOI: 10.1109/ICEM60801.2024.10700210

Coupling of Electromagnetic and Structural Domains for NVH Predition of PMSM motor

Autori: Alić, Alen Van Belle, Lucas subdirectory_arrow_right [KU Leuven IDlaunch] [ORCIDlaunch] [ResearcherIDlaunch] Di Giusto, Fabio subdirectory_arrow_right [KU Leuven IDlaunch] [ORCIDlaunch] Vukotić, Mario Nutakor, Charles Čorović, Selma Naets, Frank s
Editore: 2026 International Conference on Electrical Machines (ICEM); 2026

Effect of Temperature Distribution on the Electromagnetic Performance of PMSM with Direct Oil Cooling Hairpin Winding

Autori: Ilya Petrov, Hüseyin Canseven, Pratik Bisale, Lassi Aarniovuori, Dong Liu, and Juho Montonen
Pubblicato in: ICEM 2026
Editore: ICEM 2026

European Initiatives Addressing High Efficiency and Low-Cost Electric Motors for Circularity and Low use of Rare Resources

Autori: Eric Armengaud, Florian Ratz, Ángela Muñiz, Javier Poza, Fernando Garramiola, Gaizka Almandoz, Jenni Pippuri-Mäkeläinen, Stéphane Clenet, Maarten Messagie, Lea D’amore, Maeva Lavigne Philippot, Oriol Rillo, Daniel Montesinos, Hendrik Vansompel, Arne De Keyser, Claudio Romano, Umberto Montanaro, Davide Tavernini, Patrick Gruber, Liaoyuan Ran, Nicola Amati, Christopher Vagg, Matic Herzog, Martin Weinzerl, Janne Keränen, Juho Montonen
Pubblicato in: SAE Technical Paper Series, Numero 1, 2025
Editore: SAE International
DOI: 10.4271/2025-01-8806

A comprehensive exposition of the market situation, roadmaps, trends, and stakeholder segments in a pivoting automotive industry: Insights from ten E-VOLVE cluster R&D projects

Autori: Ratz Florian, Armengaud Eric, Pippuri-Mäkeläinen Jenni, Garramiola Fernando, Vilar Vidal Noelia, Mostapha Alaa, Buysse Maarten, La Bruna Gabriele, Storer David, De Keyser Arne, Vansompel Hendrik, Martin Lisa, Georgiou Loizos, Ćusti Medina, Brandstaetter
Pubblicato in: SmartCorners - User-centred Optimal Design of Electric Vehicle with smart E-Corners, 2026
Editore: Zenodo

Model based noise and vibration analysis framework of electric vehicle E-motor and gearbox

Autori: Wang, Hongmei; Van Belle, Lucas; Naets, Frank
Pubblicato in: : ISMA 2024 - 31st International Conference on Noise and Vibration Engineering including USD2024, 2024
Editore: : ISMA 2024 - 31st International Conference on Noise and Vibration Engineering including USD2024

Impact of electromagnetic coupling on bearing dynamics and acoustic response in electric machines

Autori: Nutakor, Charles Di Giusto, Fabio subdirectory_arrow_right [KU Leuven IDlaunch] [ORCIDlaunch] Van Belle, Lucas subdirectory_arrow_right [KU Leuven IDlaunch] [ORCIDlaunch] [ResearcherIDlaunch] Alić, Alen Čorović, Selma Vukotić, Mario Deckers, Elke
Editore: 2026 International Conference on Electrical Machines (ICEM); 2026

Development of Next Generation Sustainable Electric Traction Motors

Autori: Pippuri-Mäkeläinen, Jenni; Keränen, Janne; Lindroos, Tomi; Far, Merhnaz Farzam; Horvath, Andreas; Montonen, Juho; Podobnik, Rok; Zagirnyak, Mykhaylo; Prus, Viacheslav; Shlyk, Sergii; Wang, Hongmei; Pluymers, Bert; Van Belle, Lucas; Blockmans, Bart; Pyrhönen, Juha; Petrov, Ilya; Nutakor, Charles; Sarrazin, Mathieu; Kuthy, Melinda; Miljavec, Damijan; Zeppei, Dieter; Saje, Boris
Pubblicato in: The presentation has been kept but the proceedings are in works still, 2024
Editore: Springer

A digital platform to manage the entire lifecycle of an electric traction motor from cradle to end of first life

Autori: Van Belle, Lucas subdirectory_arrow_right [KU Leuven IDlaunch] [ORCIDlaunch] [ResearcherIDlaunch] Di Giusto, fabio subdirectory_arrow_right [KU Leuven IDlaunch] [ORCIDlaunch] Alić, Alen Vukotić, Mario Miljavec, Damijan Nutakor, Charles Petrov, Ilya
Editore: Springer Cham

Design of a High-Specific-Power Traction Motor: Innovations and Strategies for Superior Performance

Autori: Juha J. Pyrhönen, Ilya Petrov, Daniil Zadorozhniuk, Lasse Laurila, Miika Parviainen, Giota Goswami, Charles Nutakor, Jussi Sopanen, Iikka Martikainen, Dieter Zeppei, Jonas Bickel, Jenni Pippuri-Mäkeläinen, Janne Keränen, Kalle Kinnunen, Juho Montonen
Pubblicato in: IEEE Access, Numero 13, 2025, ISSN 2169-3536
Editore: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/ACCESS.2025.3589939

Hollow Hairpin Winding With Direct Oil Cooling

Autori: Ilya Petrov, Iikka Martikainen, Ilkka Poutiainen, Juzer Rangwala, Charles Nutakor, Juho Montonen, Huseyin Tayyer Canseven, Antti Suikki, Jussi Sopanen, Juha Pyrhonen
Pubblicato in: IEEE Transactions on Industry Applications, 2026, ISSN 0093-9994
Editore: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/TIA.2026.3711019

Analytical Framework for Structural and Rotordynamic Assessment of V-Shaped Permanent Magnet Rotors

Autori: Miika Parviainen, Charles Nutakor, Jussi Sopanen
Pubblicato in: Mechanisms and Machine Science, Proceedings of the 12th IFToMM International Conference on Rotordynamics, 2026
Editore: Springer Nature Switzerland
DOI: 10.1007/978-3-032-29037-3_47

Risultati dei progetti

Risultati finali

Pubblicazioni

Scarica Scarica il contenuto della pagina