Large area uniform industry compatible perovskite solar cell technology

Projektinformationen

LUMINOSITY

ID Finanzhilfevereinbarung: 101147653

DOI

10.3030/101147653

EK-Unterschriftsdatum 19 April 2024

Startdatum 1 Juni 2024

Enddatum 31 Mai 2028

Finanziert unter

• Climate, Energy and Mobility

Gesamtkosten

€ 7 607 805,50

EU-Beitrag

€ 6 996 063,13

Koordiniert durch

NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK ONDERZOEK TNO
Netherlands

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Websites, patent fillings, videos etc. (1)

Communication materials

Initial communication kit (website, factsheet, flyer, etc.)Related tasks:T8.1 Dissemination and communication activities

Documents, reports (10)

Laser patterning

Industrial compatible process for P1, P2, P3 laser patterning with geometrical fill factor >98%.Related tasks:T5.3 Laser patterning process and module fabrication

Stable solar cells

Stable flexible perovskite solar cells (<1cm2) with a T95 of 1000h for ISOS-L-1 continuous illumination at 1 sun.Related tasksT2.3 High-throughput characterization and accelerated device assessment

Eco-design strategies: intermediate

Intermediate report on design strategies towards a sustainable Perovskite PV module and its R2R production line based on intermediate TEA and LCA results.Related tasks:T7.1 Life cycle analysis of perovskite modulesT7.2 Techno economic analysis of perovskite modules

Gen01 cells

High efficiency flexible perovskite solar cells with a target PCE >21% at small scale (<1 cm2).Related tasksT2.1 Perovskite absorber optimization for flexible solar cells

Stable Gen01 module

Indoor/outdoor stability assessment of Gen01 flexible modules with a target PCE of >20% on >100 cm2 aperture area, according to the IEC and ISOS standards.Related tasks:T6.3 Outdoor stability testing of encapsulated cells and modules

Specifications for transport layers for upscaled processing

Specifications for transport layers for upscaled processing of perovskite cells and modules.Related tasks:T3.2 NiO sputtering as HTL for perovskite stackT3.3 ETL development and soft-sputtered SnO2 for ETL and buffer layersT3.4 Soft sputtering of In-free top TCO

Diss&Comm plan-2

Plan for dissemination and communication activities-2Related tasks:T8.1 Dissemination and communication activities

Verification of large area operational uniformity

Uniformity analysis of JV characteristics of a statistical distribution of 64 sub-cells (<1 cm2) over a large area (10x10 cm2) representative of a scaled-up device, target: a ± 5% standard deviation over the peak characteristic Voc, Jsc, FF, PCE, with a peak efficiency target of >21%.Related tasksT2.2 Environmentally benign solvent systems for upscaling

Diss&Comm plan-1

Plan for dissemination and communication activities-1Related tasks:T8.1 Dissemination and communication activities

Guidelines for a sustainable life cycle

Guidelines for the sustainable production and end-of-life of large area flexible perovskite modules.Related tasks:T1.2 Guidelines for sustainable production of flexible perovskite modules

Demonstrators, pilots, prototypes (2)

Integration into upscalable stack

Deposition of FTO, NiO, Buffer layer and TCO compatible with industrial process have been identified and the results on small area cells are aligned with the state of the art without compromising the fill-factor and the series resistance.Related tasks:T3.1 FTO process as current collector for perovskite stackT3.2 NiO sputtering as HTL for perovskite stackT3.3 ETL development and soft-sputtered SnO2 for ETL and buffer layersT3.4 Soft sputtering of In-free top TCO

Large are perovskite films

Demonstration of perovskite films and transport layers with large area uniformity, verified by characterization technique.Related tasks:T5.1 Upscaled processing of perovskite layersT5.2 Upscaled processing of charge-selective transport layers and contacts

Veröffentlichungen

Peer reviewed articles (3)

Tailoring the Crystallization Behavior of Mixed Lead‐Tin Mixed‐Halide Perovskites for Optimal‐Bandgap Solar Cells

Autoren: Lana M. Kessels, Willemijn H. M. Remmerswaal, Nick R. M. Schipper, Laura Bellini, Henry Kwan, Martijn M. Wienk, René A. J. Janssen
Veröffentlicht in: Advanced Science, 2025, ISSN 2198-3844
Herausgeber: Wiley
DOI: 10.1002/ADVS.202520948

Process Parameter Specification and Control in Solution Processing of Hybrid Perovskite Photovoltaics: From Domain‐Specific Jargon to Evidence‐Based, Unambiguous Description of Experimental Workflows

Autoren: Simon Ternes, Christoph J. Brabec, Luigi A. Castriotta, Thomas Exlager, Karen Forberich, Alessio Gagliardi, Michael Götte, Florian Mathies, Sinclair Ryley Ratnasingham, Lennart K. Reb, Eva Unger, Aldo Di Carlo
Veröffentlicht in: Advanced Energy Materials, 2025, ISSN 1614-6832
Herausgeber: Wiley
DOI: 10.1002/AENM.202503187

ACS applied materials & interfaces

Autoren: Erica Magliano, Francesco Di Giacomo, Harshavardhan Reddy Sathy, Shirin M. Pourmotlagh, Gemma Giliberti, David Becerril Rodriguez, Giuseppe Ammirati, Paolo Mariani, Francesca Zarotti, Fabio Matteocci,
Veröffentlicht in: ACS Applied Materials &amp; Interfaces, Ausgabe 17, 2025, ISSN 1944-8244
Herausgeber: American Chemical Society
DOI: 10.1021/ACSAMI.5C00090