Descrizione del progetto
Elettroliti fotomodellabili per il futuro delle interfacce cervello-computer
Il concetto di interfacce cervello-computer è apparso sempre più spesso nella narrativa e nelle ambizioni tecnologiche di organizzazioni e ricercatori. Queste interfacce consentono un controllo migliore e semplificato dei dispositivi. Tuttavia, lo sviluppo di interfacce cervello-computer avanzate richiede circuiti elettronici completamente integrati in grado di elaborare segnali altamente personalizzati e localizzati dal sistema nervoso e dai tessuti viventi senza metterli in pericolo. Con il supporto del programma di azioni Marie Skłodowska-Curie, il progetto PSOECNs progetterà e dimostrerà un elettrolita solido foto-modellabile per agevolare lo sviluppo di transistor elettrochimici organici allo stato solido. Questa tecnologia si rivela promettente ed essenziale per le interfacce, finora rigorosamente limitate da varie problematiche.
Obiettivo
Future advanced brain-computer interfaces, wearable and implantable bioelectronic devices, prosthetics, and intelligent soft robotics will require the ability to process signals in a highly personalized and localized manner, which will involve fully integrated electronic circuits within the nervous system and other living tissues. To achieve this goal, it is imperative to develop energy-efficient intelligent electronics that have minimal device/circuit complexity and ion-based transducing and operating mechanisms akin to those observed in biology. The use of Silicon-based devices and circuits presents several limitations. Organic electrochemical transistors (OECTs) represent a rapidly advancing technology that plays a pivotal role in the development of next-generation bioelectronic devices. However, a notable limitation of OECTs is their typical operation in aqueous electrolytes, which can lead to undesired crosstalk between different devices on the same substrate, impeding their seamless integration into large-area arrays. Therefore, it is hard to develop neural networks based on the current OECTs. Solid electrolytes offer a promising solution to these challenges. In this proposal, I design a photo-patternable solid electrolyte to develop solid-state OECTs. The aim is to directly pattern the electrolyte using sequential ultraviolet light-triggered solubility modulation. We plan to use UV-sensitive PEGDA to directly pattern the hydrogel without requiring photoresist or lift-off processes. The PEGDA network will be covalently crosslinked after UV exposure to form a hydrogel network. The strong intermolecular interaction between the two networks will allow the UV-exposed regions to resist subsequent water development, while the UV-unexposed regions will remain water-soluble. This approach will enable the creation of smaller-size, large-area processing OECT devices, ultimately facilitating the development of OECNs with sizes approaching that of biological neurons.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP.
- ingegneria e tecnologiaingegneria elettrica, ingegneria elettronica, ingegneria informaticaingegneria elettronicarobotica
- scienze mediche e della salutebiotecnologia medicaimpianti
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Parole chiave
Programma(i)
- HORIZON.1.2 - Marie Skłodowska-Curie Actions (MSCA) Main Programme
Meccanismo di finanziamento
HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European FellowshipsCoordinatore
581 83 Linkoping
Svezia