Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Development of heating technologies for the Efficient renewable Energy COnsumption of CO2-neutral DOWNSTREAM-processes

Descripción del proyecto

Nuevas tecnologías de calefacción para procesos limpios de producción de acero

Dado que la producción de acero es uno de los procesos de fabricación más intensivos en carbono, la Unión Europea apoya un cambio hacia una producción de acero más limpia para alcanzar su objetivo de neutralidad climática en 2050. El proyecto E-ECO Downstream, financiado con fondos europeos, pretende reducir la huella de carbono de la producción de acero utilizando hidrógeno, biogás y electricidad como alternativas a los combustibles basados en el carbono. El equipo del proyecto desarrollará tecnologías avanzadas para los procesos posteriores a la fabricación del acero, incluida la integración del hidrógeno verde en los quemadores de los hornos de recalentamiento existentes y la exploración de conceptos de calentamiento híbrido. Además, reevaluará los flujos de calor residual y su recuperación en futuros procesos, analizará los potenciales de eficiencia energética y evaluará estas soluciones mediante análisis tecnoecoambientales.

Objetivo

The aim of E-ECO Downstream is to enable a clean steel production by developing advanced and breakthrough technologies for the steel making downstream processes. This will decisively support the EU in achieving its goal towards climate neutrality by 2050.
E-ECO Downstream focuses on the efficient utilization of hydrogen, biogas, and electricity to substitute carbon-based fuels and drastically lower the carbon footprint of the steel production. Energy efficiency is pursued to enable sustainable utilization of volatile green energy. Currently installed burners of reheating furnaces will be enabled to utilize green H2 by integration of newly designed and 3D-printed burner components instead of replacing entire burner systems. To increase fuel flexibility hybrid heating concepts (H2 and electricity) will be investigated in a pilot walking beam furnace. Since the mentioned solutions will change the waste heat streams and their heat recovery in future downstream processes must be reevaluated. This will be done by analysing the partners processes and plants, development and testing of waste heat recovery concepts and recuperators regarding their suitability to new fuels and their off gases, while considering their impact on materials/product. Energy efficiency potentials of downstream processes will be evaluated by case studies for the application of hot charge from casting to hot rolling by covering of the slabs with passive and active panels.
The elaborated solutions will be assessed by techno-eco-environmental analysis to evaluate their applicability and to increase their acceptance in the steel community.
The E-ECO Downstream consortium has a deep and shared knowledge of iron and steel making, downstream processes and heating technology, materials engineering, numerical simulation, experimental investigations, economy, and life cycle analysis.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-RIA - HORIZON Research and Innovation Actions

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) HORIZON-CL4-2024-TWIN-TRANSITION-01

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

SCUOLA SUPERIORE DI STUDI UNIVERSITARI E DI PERFEZIONAMENTO S ANNA
Aportación neta de la UEn
€ 710 364,87
Dirección
PIAZZA MARTIRI DELLA LIBERTA 33
56127 Pisa
Italia
Región
Centro (IT) Toscana Pisa
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total
€ 710 364,88

Participantes (7)