Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS

INnovative INtegral approach for WOOD waste depollution and multi-sector valorization

Project description

Giving toxic wood waste a second life

Preservative-treated wood, which is used to extend the life of outdoor structures, is difficult to recycle due to its contamination with pesticides, biocides, and heavy metals. This so-called grade C wood waste is typically incinerated or landfilled, posing serious risks to the environment and human health. As EU initiatives like the New European Bauhaus drive demand for wood, the volume of such waste is expected to grow. With this in mind, the EU-funded WoodTreat project will develop automated systems to identify and sort contaminated wood. It will test a cascade of seven remediation and upcycling methods. Overall, the project aims to reduce virgin material use, cut pollution, and create new value-added products.

Objective

According to today’s practice, wood waste is roughly classified into three or four classes, depending on the country. The most polluted grade, often referred to as grade C or AIII/AIV, consists of preservative-treated wood, i.e. wood that has been impregnated with chemicals (pesticides, biocides and fungicides) to enhance its bio-resistance. Grade C or AIII/AIV is not currently recycled. The increased use of wood as encouraged by initiatives like the New European Bauhaus is likely to require additional volumes of preservative-treated wood. Even though such treatments extend the service life of wood products, they will still eventually become waste and must be dealt with. Wood preservation compounds pose a significant threat to not only the environment but also to human health, and therefore it is needed to develop efficient remediation technologies. At the same time, current recycling processes are greatly complicated by the presence of pollutants (chemical treatment products, heavy metals), which calls for further research on cleaning methods. As grade C comprises of several types of wood types and products, along with different levels of contamination, this poses a complex problem that needs action from both the circular economy and non-toxic environment fields. The development of an automated on-line characterization system to distinguish chemically contaminated wood waste has become a high priority. Gaps in existing regulations should be considered as may not fully support the use of upcycled wood materials from such waste streams. IN2WOOD proposes a multi-dimensional cascade approach for highly polluted post-consumer wood waste via a series of seven Pilot Validation Trials (PVTs) with aim to reduce the demand for virgin materials, reduce unsustainable options such as landfilling or incineration, and support the transition towards a circular economy by developing new value-added products from clean secondary materials.

Fields of science (EuroSciVoc)

Keywords

Programme(s)

Topic(s)

Funding Scheme

HORIZON-JU-RIA - HORIZON JU Research and Innovation Actions

See all projects funded under this funding scheme

Call for proposal

(opens in new window) HORIZON-JU-CBE-2024

See all projects funded under this call

Coordinator

SVERIGES LANTBRUKSUNIVERSITET
Net EU contribution
€ 523 092,50
Address
ALMAS ALLE 8
750 07 Uppsala
Sweden
Region
Östra Sverige Östra Mellansverige Uppsala län
Activity type
Higher or Secondary Education Establishments
Links
Total cost
€ 523 092,50

Participants (18)

Partners (2)