Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

Bulk-material Low-pressure Atomic-scale Deposition Engine - Cutting Edge Powder Coating

Obiettivo

The Bulk‑material Low‑pressure Atomic‑scale Deposition Engine (BLADE) introduces a continuous, low‑pressure Atomic Layer Deposition (ALD) technology designed specifically for flowable bulk materials such as powders and smaThe Bulk-material Low-pressure Atomic-scale Deposition Engine (BLADE) - establishes a cutting edge continuous low-pressure atomic layer deposition (ALD) process for flowable bulk materials. ALD coatings of particles can prevent corrosion of battery cathodes and anodes, reduce the amount of catalyst needed for fuel cell and electrolyser applications, enhance drug delivery capabilities of pharmaceutical powders, aid sintering of ceramics, mitigate corrosion risks in marine and space application, enhance flowability, and eliminate storage hazards of additive manufacturing powders. However, the widespread adoption of the state-of-the-art particle ALD systems is hindered by several factors, including the high initial cost of the equipment, challenges in handling batches of powder and flowable bulk material, the high-pressure operating window that warrants the use of only high-volatility precursors and a high consumption rate of inert gases and precursors. The proposed low-pressure continuous BLADE system allows for industrial-scale use of low-volatility precursors, expanding the range of applicable materials significantly. Its straightforward design eliminates the need for expensive fluidization techniques, which reduces operational costs by minimising the use of precursors and inert gases. This makes the particle ALD technique more economically viable. This innovative system would enable progress in advanced material production technologies applicable to energy conversion and storage, pharmaceutical drugs, marine and space application as well as additive manufacturing. Such a process is only possible through a creative approach that combines material sciences and advanced process engineering, bridging the worlds of fundamental research and engineering.

Campo scientifico (EuroSciVoc)

Questo progetto non è ancora stato classificato con EuroSciVoc.
Suggerisci i campi scientifici che ritieni più rilevanti e aiutaci a migliorare il nostro servizio di classificazione.

Programma(i)

Argomento(i)

Meccanismo di finanziamento

HORIZON-ERC-POC - HORIZON ERC Proof of Concept Grants

Vedi tutti i progetti finanziati nell’ambito di questo schema di finanziamento

Invito a presentare proposte

(si apre in una nuova finestra) ERC-2026-POC

Vedi tutti i progetti finanziati nell’ambito del bando

Istituzione ospitante

TECHNISCHE UNIVERSITAET MUENCHEN
Contributo netto dell'UE
€ 150 000,00
Indirizzo
Arcisstrasse 21
80333 Muenchen
Germania
Regione
Bayern Oberbayern München, Kreisfreie Stadt
Tipo di attività
Higher or Secondary Education Establishments
Collegamenti
Costo totale
Nessun dato

Beneficiari (1)