Ziel
The objective of this project was to specify and build prototype systems to demonstrate the integration of robots into CIM systems. The critical path of this integration concerns the operational level of CIM systems and includes two closely interrelated fields of research: the design of a computer-aided layout planning system and the design of an off-line programming system for robots integrated into CIM systems.
The project has three strands of work:
-development of an explicit programming system for robot control which is integrated with work-cell architecture
-development of a knowledge-based implicit programming system
-development of a planning system for robotised cells.
Work in the three areas has proceeded simultaneously. In all cases, definition and specification of software modules has been followed by their development, application and demonstration in real or simulated industrial environments.
The work includes:
study of the information system in shoe making factories;
transfer of computer aided design (CAD) technologies to the industry;
increasing the knowledge of 3-dimensional computer graphics;
creating a 3-dimensional kernel to be used as the basis of a computer integrated environment.
The objective of this project was to specify and build prototype systems to demonstrate the integration of robots into computer integrated manufacture (CIM) systems. The critical path of this integration concerns the operational level of CIM systems and includes 2 closely interrelated fields of research, the design of a computer aided layout planning system and the design of an offline programming system for robots integrated into CIM systems.
The project has 3 strands of work: the development of an explicit programming system for robot control which is integrated with work cell architecture, the development of a knowledge based implicit programming system and the development of a planning system for robotised cells. Design rules for the integration of robots into CIM were defined and published. An integrated planning and explicit offline programming system was demonstrated on October 1988. A task level programming system was demonstrated in April 1989. A high level interpreter was demonstrated in April 1989 and a planning and interactiveprogramming system was demonstrated in October 1989.
The main objective for realizing demonstrator systems by integrating modules of different partners was to show the increased functionality and efficiency of an integrated planning and programming procedure. The integration is achieved primarily through information exchange and management, performed via a relational database.
Finally it can be stated that all planning and programming means are to be integral parts of the CIM system. This requires a standardization of their interfaces to ensure their cooperation via an adequate information system. Therefore project partners are also involved in different national and international standardization activities.
Design rules for the integration of robots into CIM were defined and published. In April 1988 the following project groups for realising demonstrator systems were installed in order to integrate realised components and subsystems developed in the area of Systems Planning, Explicit and Implicit programming:
-integrated planning and Explicit Off-Line Programming System (demonstrated in October 1988).
-task Level Programming System (demonstrated in April 1989)
-high Level Interpreter (demonstrated in April 1989)
-planning and Interactive Programming System (demonstrated in October 1989).
Exploitation
The main objective for realising demonstrator systems by integrating modules of different partners was to show the increased functionality and efficiency of an integrated planning and programming procedure.
For the realisation different principles like automatic or interactive planning functions and explicit or implicit programming procedures are considered. The integration is achieved primarily through information exchange and management, performed via a relational database. Additionally realistic industrial applications or well-known benchmark tests have been selected which have to cover a broad spectrum of problems and show their solution. The realised systems or - depending on the production task - parts of them are also used by the project partners for a variety of industrial projects.
The advantages gained by the developed and industrially applied systems can be summarised as follows:
-costs for design, optimisation programming and workshop tests are significantly reduced.
-at a very early stage in a project, highly accurate information is available which leads to getting a manufacturing system into operation more quickly.
-several alternative solutions can be analysed and compared which results in an improvement of the quality of the solutions.
Finally it can be stated that all planning and programming means are to be integral parts of the CIM system. This requires a standardisation of their interfaces to ensure their co-operation via an adequate information system. Therefore project partners are also involved in different national and international standardisation activities.
In March 1990 a workshop was held to present the project results and benefits to persons from the technical and research management from companies, universities and administrations. The different demonstrations/presentations and the great interest shown by the audience clearly showed the industrial relevance of the work done and the scientific/technical value.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
- Naturwissenschaften Informatik und Informationswissenschaften Software
- Naturwissenschaften Informatik und Informationswissenschaften Datenbank relationale Datenbanken
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Daten nicht verfügbar
Koordinator
10587 Berlin
Deutschland
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.