An AI powered turn-key solution for MRI based interventional cardiology

Informazioni relative al progetto

TRACKR

ID dell’accordo di sovvenzione: 190140779

DOI

10.3030/190140779

Progetto chiuso

Data della firma CE 8 Marzo 2023

Data di avvio 1 Aprile 2023

Data di completamento 31 Dicembre 2025

Finanziato da

• The European Innovation Council (EIC)

Costo totale

€ 3 546 727,50

Contributo UE

€ 2 482 709,00

Coordinato da

NANO4IMAGING GMBH
Germany

Periodic Reporting for period 1 - TRACKR (An AI powered turn-key solution for MRI based interventional cardiology)

Periodo di rendicontazione: 2023-04-01 al 2024-03-31

Sintesi del contesto e degli obiettivi generali del progetto

Nano4Imaging (N4I) is a MedTech company specialized in MR based interventional procedures. We have previously successfully commercialized EmeryGlide, an MR compatible guidewire for cardiovascular procedures. In this project, we will deliver TRACKR – a ‘turn-key’ platform that provides the currently missing technologies for MRI guided interventional radiology. The TRACKR technology consists of: a) a coating platform based on proprietary MagnaFy technology. This nano-coating can be applied on any commercial interventional device (catheter, guide-wire, balloon) and enable their MR visibility. b) A REAL-TIME TRACKING SOFTWARE based on novel deep learning algorithms that allows real-time tracking of the MagnaFy coated devices during an interventions. Over 700million patients worldwide will benefit from our treatment without radiation and contrast agents.

Lavoro eseguito dall’inizio del progetto fino alla fine del periodo coperto dalla relazione e principali risultati finora ottenuti

We have conducted animal studies in the United States, Ohio State University (OSU) to generate training data for our algorithm. We have successfully developed the first version of the TRACKR software prototype which is currently undergoing the clinical input & feedback process. This is crucial and serves as a basis for the further development of the required functionalities while performing the interventional MRI procedures.

Finally we are preparing to use clinical data from application of our current EmeryGlide in cardiovascular indications as a validation set for our algorithm, which will be required before FDA submission of the software.
Regarding the coating platform as part of TRACKR we have printed different marker patterns on catheters from Numed, Biotronik, Terumo and others. These devices have been used in procedures in animals (OSU), including abdominal stenting, PTA and genicular artery embolization. Markers have been interrogated at different MRI sequences in low-field (0.5T) up to 3T Siemens scanners. Finally a series of markers have been printed on a new exchange wire prototype by N4I and evaluated in phantom and animal experiments.

Progressi oltre lo stato dell’arte e potenziale impatto previsto (incluso l’impatto socioeconomico e le implicazioni sociali più ampie del progetto fino ad ora)

We have signed a letter of intent (LoI) with Siemens Healthineers AG which enables us to develop a second generation version of our TRACKR Software that can be integrated into the MAGNETOM Application Platform of the market leader Siemens’ MRI Scanner Systems and gives us a broad market access. At the same we are elaborating with Philips a collaboration to train and test different marker profiles to explore guidance using their existing overlay system, which is used by some of our major customers.
The impact of our project potentially reaches beyond the immediate benefot for patients. By enabling interventions in the MRI suite, we will contribute to the breakthrough developments in the medical imaging industry such as the increased utilization of environmentally friendly MRI scanners.

Study2_CCT_Page1

Company Logo

Study2_CCT_Page2

Study2_CCT_Page4

Study1_Borm_Page1

Study1_Borm_Page4

Project Poster

Study1_Borm_Page2

Study1_Borm_Page3

Study2_CCT_Page3