Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-05-28

Design & Manufacture of a ground based structural/systems demonstrator (Phase 2)

Objectif

The Natural Laminar Flow airfoil is considered to be one of the key technologies to reduce drag and thus improve the performance of an aircraft, therefore reducing emissions. The Natural Laminar Flow Wing is recognized as a potential key technology for the next generation of aircraft.
The requirements of a Natural laminar flow wing differ significantly from a conventional turbulent wing, requiring changes to both the architecture of the wing, the aerofoil definition and the detailed design and manufacturing concepts.
The performance of a natural laminar flow wing requires very tight surface roughness and waviness tolerances and contamination free surfaces in the areas where laminar flow is to be maintained. Alternative leading edge moveable concepts and novel leading edge/wingbox attachment concepts, and extremely slender LE sections also have to be addressed in the design.
In Phase 1 of the programme, the problem of how to achieve an aerodynamic surface of sufficient quality to support natural laminar flow has been addressed by GKN. In particular a number of mechanical joint concepts have been evaluated against a very tight set of criteria including steps and gaps, surface finish, aerofoil profile, waviness and fastening techniques.
Phase 2 (this project) will form the basis for the further development of the concepts for a ground-based demonstrator. The work on LE design is focused into five specific development activities: Innovative Wing Leading Edge Ribs and Integrated Leading Edge Cover solutions; Kruger flap integration into the D-Nose; Continued Investigations on potential Wing Ice Protection (WIPS) solutions; Lightning Strike protection for the Leading Edge zone; Bird strike risk assessment.

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

SP1-JTI-CS-2010-01
Voir d’autres projets de cet appel

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinateur

GKN AEROSPACE SERVICES LIMITED
Contribution de l’UE
€ 249 807,00
Adresse
2ND FLOOR, ONE CENTRAL BOULEVARD, BLYTHE VALLEY PARK
B90 8BG SOLIHULL
Royaume-Uni

Voir sur la carte

Région
West Midlands (England) West Midlands Solihull
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée
Mon livret 0 0