Objectif
This project will exploit the potential of chalcogenide based thin film photovoltaic technologies for the development and scale-up of new processes based on nanostructured materials for the production of high efficiency and low cost photovoltaic devices and modules compatible with mass production requirements. Cu(In,Ga)(S,Se)2 (CIGS) chalcogenide based devices have the highest efficiency of all thin film PV technologies, having recently achieved a record value of 20.3% at cell level. These technologies have already entered the stage of mass production, with commercial modules that provide stable efficiencies in the 11-12% range, and a predicted world-side production capacity over 2 GW/a for 2011.
However, current production methods in CIGS industrial technologies typically rely on costly, difficult to control (over large surfaces) vacuum-based deposition processes that are known for low material utilisation of 30-50%. This compromises the potential reduction of material costs inherent to thin film technologies.
At the forefront of this, the SCALENANO project proposes the development of alternative environmental friendly and vacuum free processes based on the electrodepositon of nanostructured precursors with the objective to achieve a much more efficient exploitation of the cost saving and efficiency potential of CIGS based PV. The project also includes the exploration and development of alternative new processes with very high potential throughput and process rate based in the use of printing techniques with novel nanoparticle ink formulations and new cost effective deposition techniques, that will allow proposing an industrial roadmap for the future generation of chalcogenide based cells and modules
Champ scientifique
Programme(s)
Thème(s)
- ENERGY.2011.2.1-2 - Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, Joint call with NMP
- NMP.2011.1.2-1 - Development and up-scaling of innovative photovoltaic cell processes and architectures to pilot-line scale for industrial application, call jointly implemented with ENERGY
Appel à propositions
FP7-NMP-ENERGY-2011
Voir d’autres projets de cet appel
Régime de financement
CP-IP - Large-scale integrating projectCoordinateur
08930 Sant Adria De Besos
Espagne
Voir sur la carte
Participants (13)
13790 Rousset
Voir sur la carte
8600 Dubendorf
Voir sur la carte
64293 DARMSTADT
Voir sur la carte
16163 Genova
Voir sur la carte
Participation terminée
NG7 2RD Nottingham
Voir sur la carte
Participation terminée
NG7 2QP Nottingham
Voir sur la carte
4365 ESCH-SUR-ALZETTE
Voir sur la carte
75015 PARIS 15
Voir sur la carte
14109 Berlin
Voir sur la carte
1117 BUDAPEST
Voir sur la carte
6928 Manno
Voir sur la carte
14195 Berlin
Voir sur la carte
WC1E 6BT LONDON
Voir sur la carte