Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-18

Flexible Conductive Composite Repair Heaters

Objetivo

"Appropriate curing of the patch resin and the adhesive layer is an essential step to secure the integrity and the sound mechanical performance of a bonded composite repair. Today, the required elevation of temperature is usually achieved by means of resistance heating blankets, which conduct heat to the repair area, regulated through closed loop temperature control, using one or two spot temperature measurements. Even though this method is rather simple and works adequately for small repairs, when larger areas need to be heated, discrepancies, like cold or hot spots, frequently occur, due to variable heat losses, caused by geometrical asymmetry, “heat sinks” etc. The scope of this proposal, further to the know-how of the proposing Consortium in conventional resistance heating and induction heating, is to develop a third heating method called Conductive Skin Heating (CSH). The main advantages of CSH are that the voltage and the current could be very low compared to heat mats because of the very good efficiency of this middle frequency heating, which will be about 50 Hz to 20 kHz. Similarly, the voltage range could be limited between 5 to 100 V, which means that the maximum current in the mat will be less than 100 A, depending on the application and the heating rates which need to be achieved. Consequently, the CSH-mats could be much cheaper, while the electrical danger for the operators and any peripherical electronic devices will be significantly reduced. Additionally, as this method allows heating of very thin foils, the CSH-mats will be very flexible and easy to adapt to complex 3Dgeometries, while they could be easily integrated into the vacuum bag. Consequently, the handling of this thin and lightweight CSH-mats will be much easier compared to the other heating systems used for FRP repair, like thermal blanket and induction heating."

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

SP1-JTI-CS-2011-01
Consulte otros proyectos de esta convocatoria

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinador

GMI AERO
Aportación de la UE
€ 99 000,00
Dirección
13 RUE GEORGES AURIC CAP 19
75019 Paris
Francia

Ver en el mapa

Región
Ile-de-France Ile-de-France Paris
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos

Participantes (1)

Mi folleto 0 0