Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-18

Flexible Conductive Composite Repair Heaters

Objectif

"Appropriate curing of the patch resin and the adhesive layer is an essential step to secure the integrity and the sound mechanical performance of a bonded composite repair. Today, the required elevation of temperature is usually achieved by means of resistance heating blankets, which conduct heat to the repair area, regulated through closed loop temperature control, using one or two spot temperature measurements. Even though this method is rather simple and works adequately for small repairs, when larger areas need to be heated, discrepancies, like cold or hot spots, frequently occur, due to variable heat losses, caused by geometrical asymmetry, “heat sinks” etc. The scope of this proposal, further to the know-how of the proposing Consortium in conventional resistance heating and induction heating, is to develop a third heating method called Conductive Skin Heating (CSH). The main advantages of CSH are that the voltage and the current could be very low compared to heat mats because of the very good efficiency of this middle frequency heating, which will be about 50 Hz to 20 kHz. Similarly, the voltage range could be limited between 5 to 100 V, which means that the maximum current in the mat will be less than 100 A, depending on the application and the heating rates which need to be achieved. Consequently, the CSH-mats could be much cheaper, while the electrical danger for the operators and any peripherical electronic devices will be significantly reduced. Additionally, as this method allows heating of very thin foils, the CSH-mats will be very flexible and easy to adapt to complex 3Dgeometries, while they could be easily integrated into the vacuum bag. Consequently, the handling of this thin and lightweight CSH-mats will be much easier compared to the other heating systems used for FRP repair, like thermal blanket and induction heating."

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

SP1-JTI-CS-2011-01
Voir d’autres projets de cet appel

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

JTI-CS - Joint Technology Initiatives - Clean Sky

Coordinateur

GMI AERO
Contribution de l’UE
€ 99 000,00
Adresse
13 RUE GEORGES AURIC CAP 19
75019 Paris
France

Voir sur la carte

Région
Ile-de-France Ile-de-France Paris
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée

Participants (1)

Mon livret 0 0