Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS
Contenido archivado el 2024-06-18

PercIGS

Objetivo

To a large extent, the latest CIGS improvement is due to enhancements in the semiconductor material quality. However, as the material quality of the semiconductors improves, other parts of the solar cell are becoming the new bottlenecks to increase the efficiency further towards the theoretical limit for non-concentrated light, which is 30 %.
Therefore, this project is focused on an advanced, yet industrially feasible, device structure: The introduction of point contacts and a passivation layer will be used to reduce the back contact recombination and thus enhance efficiency. The application focuses towards CIGS based solar cells, but the concept can be generalized to other high quality thin film solar cell technologies as well. The project is structured in four sub-projects, of which the motivations are described below.

Specific goals:
• An innovative concept to reduce the high recombination back contact surface area will be developed. This will drastically reduce the recombination rate at the back contact for state of the art CIGS solar cells
• Increase of solar cell efficiency by up to 1.5 absolute percent by increasing photo-generated voltage and current.
• The concept will also be used as a powerful tool to investigate the influence of grain boundaries in the polycrystalline CIGS semiconductor material.

The project has four main objectives: (1) point contact development, (2) assessment of passivation layers, (3) application in solar cell devices, and (4) a CIGS material study.

A successful outcome will advance the current state-of-the-art in CIGS research, through:
• New methods to develop nano-sized contacting points
• Novel (rear) passivation layers for CIGS material
• An advanced device structure to increase CIGS solar cell efficiency
• Improved understanding of the influence of grain boundaries on charge transport in CIGS material

Ámbito científico (EuroSciVoc)

CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..

Para utilizar esta función, debe iniciar sesión o registrarse

Programa(s)

Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.

Tema(s)

Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.

Convocatoria de propuestas

Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.

FP7-PEOPLE-2011-IEF
Consulte otros proyectos de esta convocatoria

Régimen de financiación

Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.

MC-IEF - Intra-European Fellowships (IEF)

Coordinador

UPPSALA UNIVERSITET
Aportación de la UE
€ 181 418,40
Dirección
VON KRAEMERS ALLE 4
751 05 Uppsala
Suecia

Ver en el mapa

Región
Östra Sverige Östra Mellansverige Uppsala län
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total

Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.

Sin datos
Mi folleto 0 0