Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français français
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-18

PercIGS

Objectif

To a large extent, the latest CIGS improvement is due to enhancements in the semiconductor material quality. However, as the material quality of the semiconductors improves, other parts of the solar cell are becoming the new bottlenecks to increase the efficiency further towards the theoretical limit for non-concentrated light, which is 30 %.
Therefore, this project is focused on an advanced, yet industrially feasible, device structure: The introduction of point contacts and a passivation layer will be used to reduce the back contact recombination and thus enhance efficiency. The application focuses towards CIGS based solar cells, but the concept can be generalized to other high quality thin film solar cell technologies as well. The project is structured in four sub-projects, of which the motivations are described below.

Specific goals:
• An innovative concept to reduce the high recombination back contact surface area will be developed. This will drastically reduce the recombination rate at the back contact for state of the art CIGS solar cells
• Increase of solar cell efficiency by up to 1.5 absolute percent by increasing photo-generated voltage and current.
• The concept will also be used as a powerful tool to investigate the influence of grain boundaries in the polycrystalline CIGS semiconductor material.

The project has four main objectives: (1) point contact development, (2) assessment of passivation layers, (3) application in solar cell devices, and (4) a CIGS material study.

A successful outcome will advance the current state-of-the-art in CIGS research, through:
• New methods to develop nano-sized contacting points
• Novel (rear) passivation layers for CIGS material
• An advanced device structure to increase CIGS solar cell efficiency
• Improved understanding of the influence of grain boundaries on charge transport in CIGS material

Champ scientifique (EuroSciVoc)

CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.

Vous devez vous identifier ou vous inscrire pour utiliser cette fonction

Programme(s)

Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.

Thème(s)

Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.

Appel à propositions

Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.

FP7-PEOPLE-2011-IEF
Voir d’autres projets de cet appel

Régime de financement

Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.

MC-IEF - Intra-European Fellowships (IEF)

Coordinateur

UPPSALA UNIVERSITET
Contribution de l’UE
€ 181 418,40
Adresse
VON KRAEMERS ALLE 4
751 05 Uppsala
Suède

Voir sur la carte

Région
Östra Sverige Östra Mellansverige Uppsala län
Type d’activité
Higher or Secondary Education Establishments
Liens
Coût total

Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.

Aucune donnée
Mon livret 0 0