Obiettivo
Aim of the EEM450PR project is to continue the engagement of the European semiconductor equipment and materials industry in the 450mm wafer size transition that started with the ENIAC JU EEMI450 initiative. It will also bring about the start of a vision to place an equipment development pilot line in the imec facility in Leuven. This will provide Europe with a complementary activity for 450mm equipment, and later on sub 10nm process development.
The consortium comprises 34 members (from 10 different European countries); 11 are SMEs and 4 are research institutes.
The main objective of the work on lithography is the proof of concept at test bench level of 450 mm critical wafer stage technology to get prepared for 450 mm early lithography prototype realization in a subsequent phase.
The work on materials is the follow-up activity of the EEMI450 project to reach the next level of 450mm wafer quality. To be able to produce these wafers with the required capabilities new sophisticated equipment for the Chemical Mechanical Polishing process step as well as very advanced equipment for final cleaning procedures will be developed and will be integrated in a 450mm wafer line.
Next to technology development also a 450mm equipment development pilot line facility will be prepared by developing state-of-the-art facilities readiness, including stringent energy and contamination considerations taking recent ISMI Guidelines, Semi Standards and ITRS requirements and activities into account.
Furthermore, work will be done on the development of pilotline-ready equipment and modules, and further optimization of prototypes, concerning front-end (wafer based) semiconductor processing. The companies that were involved in the ENIAC EEMI450 project will use the results obtained therein for further development of their respective equipment.
Finally, metrology equipment performance will be enhanced to improve the current 300mm cost of ownership for 12nm technology control on 450mm wafers.
Invito a presentare proposte
ENIAC-2011-2
Vedi altri progetti per questo bando
Meccanismo di finanziamento
JTI-CP-ENIAC - Joint Technology Initiatives - Collaborative Project (ENIAC)Coordinatore
5504DR Veldhoven
Paesi Bassi
Mostra sulla mappa
Partecipanti (31)
01237 DRESDEN
Mostra sulla mappa
76705 Rehovot
Mostra sulla mappa
8610 Uster
Mostra sulla mappa
1322 AP ALMERE
Mostra sulla mappa
73614 SCHORNDORF
Mostra sulla mappa
Mostra sulla mappa
4782 St Florian Am Inn
Mostra sulla mappa
5651 GG Eindhoven
Mostra sulla mappa
80686 Munchen
Mostra sulla mappa
HANAU
Mostra sulla mappa
89160 Dornstadt
Mostra sulla mappa
85551 Heimstetten
Mostra sulla mappa
OX2 0JX Oxford
Mostra sulla mappa
3001 Leuven
Mostra sulla mappa
. LEIXLIP KILDARE
Mostra sulla mappa
2306990 Migdal Haemek
Mostra sulla mappa
23100 Migdal Haemek
Mostra sulla mappa
9500 Villach
Mostra sulla mappa
1322 AP Almere
Mostra sulla mappa
70499 STUTTGART
Mostra sulla mappa
85716 Unterschleissheim
Mostra sulla mappa
1059 CM Amsterdam
Mostra sulla mappa
2595 DA Den Haag
Mostra sulla mappa
76100 REHOVOT
Mostra sulla mappa
OX13 5QX Abingdon
Mostra sulla mappa
5656 AG Eindhoven
Mostra sulla mappa
31700 Blagnac
Mostra sulla mappa
4365104 Ra Anana
Mostra sulla mappa
63868 GROSSEWALLSTADT
Mostra sulla mappa
81677 Munchen
Mostra sulla mappa
5705 CS Helmond
Mostra sulla mappa