Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS
Contenu archivé le 2024-06-18

The Electric Vehicle revOLUTION enabled by advanced materials highly hybridized into lightweight components for easy integration and dismantling providing a reduced life cycle cost logic

Objectif

Hybrid-EVs and Full-EVs on the market are products where the Internal-Combustion-Engine (ICE) is supplemented by an electric-motor (HEV) or replaced by an all-electric power-train (FEV). Neither approach address lightweight or modularity inheriting the same disadvantages as conventional ICEV - Electrification of mobility must face a conceptual rEVOLUTION! This project breaks the paradigm of current Body-in-White (BiW) by delegating the whole structural function to a novel BiW archetype made up of a central cell, including Multifunctional-Rolling-Chassis (MRC) enabled by a new generation of highly-hybridized structural components and complemented by a severe-crash-dimensioned front end plus a modular rear end. This concept will be the common basis for a family of user friendly vehicles differing by changing only the rear end according to the customer demand. Advanced materials will enable the development of novel super-lightweight hybrid components complying with safety standards and recycling constraints, and enable the design of the innovative MRC for FEV leading to a further weight reduction of 40% over that achieved using the current state of the art in the SuperLIGHT-CAR project. The EVolution goal is to demonstrate the sustainable production of a 600 kg weight FEV by the end of 2015. To this end EVolution addresses the whole vehicle by prototyping, assembling, and disassembling, the most representative components (MRC, crash cross-beam, crash box, suspension sub-frame, side-door, A-pillar, and a multifunctional-hard-top) made from raw polymers and aluminum alloys commonly used in the automotive industry, to ensure compliance with EC Directive 2000/53/EC ‘End-of life vehicle’ which imposes stringent requirements on the disposal and recycling of motor vehicles. Guaranteeing the safety and regulatory compliance, with a weight saving of 50%, each component chosen will prove, mutatis mutandis, the revolutionary potential of the EV solution in all components employed today in current high volume production.

Champ scientifique (EuroSciVoc)

Programme(s)

Thème(s)

Appel à propositions

FP7-2012-GC-MATERIALS
Voir d’autres projets de cet appel

Régime de financement

CP-IP - Large-scale integrating project

Coordinateur

AALBORG UNIVERSITET
Contribution de l’UE
€ 808 520,00
Adresse
FREDRIK BAJERS VEJ 7K
9220 Aalborg
Danemark
Région
Danmark Nordjylland Nordjylland
Type d’activité
Higher or Secondary Education Establishments
Liens
Coût total
Aucune donnée

Participants (24)