Ziel
Virtual prototyping (VP) is a key technology for environmental friendly and cost effective design in the aircraft industry. However, the underlying analysis and simulation tools (for loads, stresses, emissions, noise), are currently applied with a unique set of input data and model variables, although realistic operating conditions are a superposition of numerous uncertainties under which the industrial products operate (uncertainties on operational conditions, on geometries resulting from manufacturing tolerances, numerical error sources and uncertain physical model parameters). Major new developments in this new scientific area of Uncertainty Management and Quantification (UM and UQ) and Robust Design methods (RDM) are needed to bridge the gap towards industrial readiness, as the treatment of uncertainties enables a rigorous management of performance engagements and associated risks. This is the main objective of the UMRIDA project, which has the following action lines:
• Address major challenges in UQ and RDM to develop and apply new methods able to handle large numbers of simultaneous uncertainties, generalized geometrical uncertainties in design and analysis within a turn-around time acceptable for industrial readiness in VP systems.
• To respond to the validation requirements of UQ and RDM, a new generation of database, formed by industrial challenges (provided by the industrial partners), and more basic test cases, with prescribed uncertainties, is proposed.
• The methods developed will be assessed quantitatively towards the industrial objectives on this database, during the project and at two open workshops. The gained experience will be assembled in a Best Practice Guide on UQ and RDM.
It is anticipated that the UMRIDA project will have a major impact on most of the EU objectives for air transport, by enabling design methods to take into account uncertainty based risk analysis.
Wissenschaftliches Gebiet
- natural sciencescomputer and information sciencesdatabases
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- natural sciencesmathematicspure mathematicsgeometry
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
- natural sciencescomputer and information sciencessoftwaresoftware applicationssimulation software
Programm/Programme
Aufforderung zur Vorschlagseinreichung
FP7-AAT-2013-RTD-1
Andere Projekte für diesen Aufruf anzeigen
Finanzierungsplan
CP-FP - Small or medium-scale focused research projectKoordinator
1170 Bruxelles / Brussel
Belgien
Auf der Karte ansehen
Beteiligte (21)
75008 Paris
Auf der Karte ansehen
3440 Budingen
Auf der Karte ansehen
Beteiligung beendet
00195 Roma
Auf der Karte ansehen
8005 Zurich
Auf der Karte ansehen
64510 Bordes
Auf der Karte ansehen
152903 RYBINSK YAROSLAV REGION
Auf der Karte ansehen
34012 Trieste
Auf der Karte ansehen
91120 Palaiseau
Auf der Karte ansehen
51147 Koln
Auf der Karte ansehen
78153 Le Chesnay Cedex
Auf der Karte ansehen
81043 Capua
Auf der Karte ansehen
08034 Barcelona
Auf der Karte ansehen
31057 Toulouse Cedex
Auf der Karte ansehen
2628 CN Delft
Auf der Karte ansehen
1050 Bruxelles / Brussel
Auf der Karte ansehen
00-661 WARSZAWA
Auf der Karte ansehen
1015 Lausanne
Auf der Karte ansehen
581 83 Linköping
Auf der Karte ansehen
31700 BLAGNAC
Auf der Karte ansehen
01069 Dresden
Auf der Karte ansehen
00195 Roma
Auf der Karte ansehen