Skip to main content
European Commission logo
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS

New aerospace advanced cost effective materials and rapid manufacturing technologies

Risultati finali

Numerical models of individual materials and processes

This deliverable will be a technical report describing algorithms numerical procedures and software modules developedenhanced for the modelling of the materials TiAl and general procedures of modelling RM and laserassisted machining processes respectively

RM Test Part

A test part will be defined containing typical features from all demonstrators This will be used to assess the build strategies and parameter sets Depends on D11

End User requirements

This deliverable will be a report describing the KPIs covering technological/scientific as well as environmental and economic requirements contained in a KPI matrix

Final ethics report
Report, gender policy and H&S

Report on the gender and diversity policy in the project, including actions to be taken taking ethical considerations into account, gender balance in project and methods taken to address any issue which arise.

Multi-scale models of the process chain

This deliverable will be a technical report describing algorithms numerical procedures and software modules developedenhanced for coupling and linking modelling at different lengthscales and the general procedure of modelling the whole process chain

Website available

A public website will be available with a document repository for partners. Basic project information will be included, to be expanded as the project progresses

Website fully updated

All the publishable work carried out during the project will be available on the website, including a description of all results.

Pubblicazioni

FRF Estimation through Sweep Milling Force Excitation (SMFE)

Autori: A. Iglesias, J. Munoa, C. Ramírez, J. Ciurana, Z. Dombovari
Pubblicato in: Procedia CIRP, Numero 46, 2016, Pagina/e 504-507, ISSN 2212-8271
Editore: Springer
DOI: 10.1016/j.procir.2016.04.019

Integrated, multidisciplinary approaches for micro-manufacturing research, and new opportunities and challenges to micro-manufacturing

Autori: Yi Qin
Pubblicato in: Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, Numero 232/1, 2018, Pagina/e 5-21, ISSN 2397-7914
Editore: IMechE
DOI: 10.1177/2397791417750350

Characterisation of titanium aluminide components manufactured by laser metal deposition

Autori: A.R.C. Sharman, J.I. Hughes, K. Ridgway
Pubblicato in: Intermetallics, Numero 93, 2018, Pagina/e 89-92, ISSN 0966-9795
Editore: Elsevier BV
DOI: 10.1016/j.intermet.2017.11.013

Hardware-in-the-loop simulator for stability study in orthogonal cutting

Autori: I. Mancisidor, X. Beudaert, A. Etxebarria, R. Barcena, J. Munoa, J. Jugo
Pubblicato in: Control Engineering Practice, Numero 44, 2015, Pagina/e 31-44, ISSN 0967-0661
Editore: Pergamon Press Ltd.
DOI: 10.1016/j.conengprac.2015.07.006

Ultimate capability of variable pitch milling cutters

Autori: Gabor Stepan, David Hajdu, Alex Iglesias, Denes Takacs, Zoltan Dombovari
Pubblicato in: CIRP Annals, Numero 67/1, 2018, Pagina/e 373-376, ISSN 0007-8506
Editore: Hallwag AG
DOI: 10.1016/j.cirp.2018.03.005

Optimum Selection of Variable Pitch for Chatter Suppression in Face Milling Operations

Autori: Alex Iglesias, Zoltan Dombovari, German Gonzalez, Jokin Munoa, Gabor Stepan
Pubblicato in: Materials, Numero 12/1, 2019, Pagina/e 112, ISSN 1996-1944
Editore: MDPI Open Access Publishing
DOI: 10.3390/ma12010112

Simulation of thermal behaviours and powder flow for direct laser metal deposition process

Autori: Quanren Zeng, Yankang Tian, Zhenhai Xu, Yi Qin
Pubblicato in: MATEC Web of Conferences, Numero 190, 2018, Pagina/e 02001, ISSN 2261-236X
Editore: EDP Sciences
DOI: 10.1051/matecconf/201819002001

Study of the Tuning of Variable Pitch Milling Cutters

Autori: Dombovari , Zoltan; Iglesias , Alexander; Stépán , Gábor
Pubblicato in: http://www.confercare.manchester.ac.uk/events/matador2017/, Numero 2, 2017
Editore: Springer

Numerical modelling of the gas-powder flow during the laser metal deposition for additive manufacturing

Autori: Zeng, Quanren; Tian, Yankang; Xu, Zhenhai; Qin, Yi
Pubblicato in: 15th International Conference on Manufacturing Research, Numero 1, 2017
Editore: IOS Press
DOI: 10.5281/zenodo.820051

Advancement in Additive Manufacturing & Numerical Modelling Considerations of Direct Energy Deposition Process

Autori: Zeng Q, Xu Z, Tian Y and Qin Y
Pubblicato in: The Proceeding of the 14th International Conference on Manufacturing Research, 2016, Pagina/e 104-109, ISBN 978-1-61499-668-2
Editore: IOS Press
DOI: 10.3233/978-1-61499-668-2-104

È in corso la ricerca di dati su OpenAIRE...

Si è verificato un errore durante la ricerca dei dati su OpenAIRE

Nessun risultato disponibile