Obiettivo
Printed electronics (PE) is set to revolutionise the electronics industry over the next decade and can offer Europe the opportunity to regain lost market share. Printed electronics allows for the direct printing of a range of functional (conductive, resistive, capacitive and semi-conducting) nanomaterials formulations to enable a simpler, more cost-effective, high performance and high volume processing in comparison to traditional printed circuit board and semiconductor manufacturing techniques. It has been reported by Frost and Sullivan that the market for printed electronics will increase in revenues from $0.53Bn in 2010 to $5.04 Bn in 2016 at a compound annual growth rate of 32.5%.
However, the migration towards low-cost, liquid-based, high resolution deposition and patterning using high throughput techniques, such as inkjet printing, requires that suitable functional nanomaterials formulations (e.g. inks) are available for end users in industrially relevant quantities. Presently, there are issues with industrial supply of nanomaterials which are low cost, high performance, environmentally friendly and tailored for high throughput systems. Therefore better collaboration is warranted between supply chain partners to ensure nanomaterial production and nanomaterial formulations are tailored for end use applications to meet this need.
The INSPIRED project will address these fundamental issues within the printed electronics industry: Ensuring that suitable functional nanomaterials formulations (inks) are available for end users in industrial scale quantities. Production of these nanomaterial formulations on an industrial scale and then depositing them using cost-effective, high throughput printing technologies enables rapid production of printed electronic components, on a wide variety of substrates. Therefore, enabling new electronics applications, whilst overcoming the problems associated with traditional manufacturing.
Campo scientifico
- ingegneria e tecnologiananotecnologiananomaterialinanostrutture bidimensionaligrafene
- scienze naturaliscienze chimichechimica inorganicametalli di transizione
- ingegneria e tecnologiaingegneria dei materialirivestimenti e pellicole
- ingegneria e tecnologiaingegneria elettrica, ingegneria elettronica, ingegneria informaticaingegneria elettronicasensori
Programma(i)
Invito a presentare proposte
Vedi altri progetti per questo bandoBando secondario
H2020-NMP-PILOTS-2014
Meccanismo di finanziamento
IA - Innovation action
Coordinatore
8010 Graz
Austria
Mostra sulla mappa
Partecipanti (13)
15895 Ames A Coruna
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
Partecipazione conclusa
GU14 0LX Farnborough
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
OX5 1FP Kidlington
Mostra sulla mappa
DH8 7ND Consett
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
8010 Graz
Mostra sulla mappa
PO15 5TH Fareham
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
Partecipazione conclusa
13790 Rousset
LV-3602 Ventspils
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
1150 Bruxelles
Mostra sulla mappa
40126 Bologna
Mostra sulla mappa
48160 Derio (Bizkaia)
Mostra sulla mappa
15782 Santiago De Compostela
Mostra sulla mappa
175 43 Jarfalla
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.