Obiettivo
Two FP7 European projects ELECTRICAL and SARISTU aim to develop methods to manufacture CNT reinforced multifunctional composites compatible with current industrial manufacturing processes. According to the results, three CNT integration strategies appear as promising methods to be driven towards an industrial scale manufacturing process: buckypapers, CNTtreated prepreg and CNT doped nonwoven veils. Although each of the technologies can act separately they can be combined synergistically in a way that a higher multifunctional level can be achieved according to the final requirements of the application.
This project aims to develop open access pilot lines for the industrial production of buckypapers, CNT treated prepreg and CNT doped non-woven veils for composite applications in sectors such as Aeronautic and Automotive. The purpose is to efficiently and economically manufacture components using novel developed at a scale suitable for industrial uptake. The developed facilities will not only provide increased capabilities to the operating company but also offer a network of nanorelated manufacturing facilities suited to the needs of related SMEs. A European platform of nanobased pilot lines will be created to which companies, and more precisely SMEs, can gain access and make use of the facilities as well as the experience and knowledge of the operating RTO.The partners will work with existing EU clusters and initiatives aimed at the establishment of an EU nanosafety and regulatory strategy framework to ensure the safe use of these products particularly at an industrial scale. This will be achieved through collaboration with end users to ensure the developed products are accepted within existing health and safety procedures or through the introduction of new ones.PLATFORM proposes solutions that will generate new market opportunities for European Aeronautic and Automotive components manufacturing offering to OEMs new added-value products based on nano-enabled products
Campo scientifico
- engineering and technologymechanical engineeringmanufacturing engineering
- engineering and technologymaterials engineeringcomposites
- engineering and technologymechanical engineeringvehicle engineeringautomotive engineering
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
- engineering and technologymaterials engineeringnanocomposites
Programma(i)
Invito a presentare proposte
Vedi altri progetti per questo bandoBando secondario
H2020-NMP-PILOTS-2014
Meccanismo di finanziamento
RIA - Research and Innovation actionCoordinatore
20009 DONOSTIA-SAN SEBASTIAN (GIPUZKOA)
Spagna
Mostra sulla mappa
Partecipanti (14)
265 04 Rio Patras
Mostra sulla mappa
02-366 WARSZAWA
Mostra sulla mappa
265 04 Ano Kastritsi-Patras
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
10043 Orbassano
Mostra sulla mappa
28906 Getafe
Mostra sulla mappa
5060 SAMBREVILLE
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
Partecipazione conclusa
55011 ALTOPASCHIO (LUCCA)
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
28004 Madrid
Mostra sulla mappa
48160 Derio
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
Mostra sulla mappa
SG4 0TW HITCHIN HERTS
Mostra sulla mappa
Partecipazione conclusa
11500 EL PUERTO DE SANTA MARIA
Mostra sulla mappa
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.
11500 PUERTO DE SANTA MARIA EL CADIZ
Mostra sulla mappa
Mostra sulla mappa