Reconfigurable silicon architecture for connected intelligent lighting.

Projektinformationen

SmartComm-LED

ID Finanzhilfevereinbarung: 672583

DOI

10.3030/672583

Projekt abgeschlossen

EK-Unterschriftsdatum 13 April 2015

Startdatum 1 Mai 2015

Enddatum 30 September 2015

Finanziert unter

• SOCIETAL CHALLENGES - Secure, clean and efficient energy

Gesamtkosten

€ 71 429,00

EU-Beitrag

€ 50 000,00

Koordiniert durch

IKON SEMICONDUCTOR LIMITED
Ireland

Periodic Reporting for period 1 - SmartComm-LED (Reconfigurable silicon architecture for connected intelligent lighting.)

Berichtszeitraum: 2015-05-01 bis 2015-09-30

Zusammenfassung vom Kontext und den Gesamtzielen des Projekts

Ikon Semiconductors objectives in this feasibility study were as follows:

1. To define a novel configurable silicon architecture for the connected intelligent lighting market.
2. To verify the technical and economic viability of the proposed SmartComm-LED architecture.
3. To prepare a feasibility study which refines our market analysis and creates a strategy which enables Ikon Semiconductor to commercialise this technology.
4. To prepare an expanded business plan for the SmartComm-LED chip-set solution.
5. To identify potential partners for a future Phase-2 proposal.

Arbeit, die ab Beginn des Projekts bis zum Ende des durch den Bericht erfassten Berichtszeitraums geleistet wurde, und die wichtigsten bis dahin erzielten Ergebnisse

Work performed during the reporting period and main results achieved so far:

Significant progress has been made on each of these objectives. Based on customer feedback we have defined a configurable chip-set that is optimised for the connected intelligent lighting market. The solution consists of 2 approaches depending on whether the application is a single-channel (white LEDs only) or multi-channel (RGB LEDs). The technical details of these 2 approaches are expanded on in the body of this report.

In addition we have carried out a technical and economic viability of the proposed solution which indicates that the proposed approach will deliver the required performance and feature-set and will result in a cost competitive solution optimised for the smart lighting market. This has also taken into account contributions from our end-user advisors and our technology subcontractors. Ikon Semiconductor has carried out a detailed market analysis, including discussions with target customers, which in turn has fed into the preliminary technical specification for the proposed chip-set. A business plan has also been prepared and it is planned that this will also form the basis of a Phase-2 application. We have also identified a number of potential partners for such a phase-2 application.

Fortschritte, die über den aktuellen Stand der Technik hinausgehen und voraussichtliche potenzielle Auswirkungen (einschließlich der bis dato erzielten sozioökonomischen Auswirkungen und weiter gefassten gesellschaftlichen Auswirkungen des Projekts)

Expected final results and their potential impact:

The phase-1 feasibility study has been successful and the company expects to progress the development of the proposed “SmartComm-LED” chip-set for connected intelligent lighting. We intend using the outcomes as the basis for a phase-2 proposal and also will be used to seek additional investment support. It is clear that the smart lighting market is gaining significant traction and we aim to offer the leading silicon solution for the connected intelligent lighting market.

Block Diagram of SmartComm-LEDE Concept