Development and Manufacturing of an All-Oxide Inter Turbine Duct for Aeroengines

Risultati finali

Material Specification of braided material

Report on Material Specification of braided material handed over to TM

Report on limitations of braided structures for CMC

Report on limitation of l braided structures for CMC according to WP 2.2.

Documentation of the test matrix: the type of test (with norm or standard to be followed), the number and type parameter to be kept constant. The Testmatrix will be review and probably amended along the project. Review and amendments will not be made public.

Dissemination Report

Documents the dissemination steps and the measures to maximize the success of dissemination and the specified acceptance standards for the production of OCMCs.

Delivery of engine parts for demonstrator testing

Delivery of 15 ITD parts (if segmented) or in agreed No. are handed over to the TM.

Delivery of parts for destructive and non-destructive testing

Delivery of 20 parts (if segmented) or in agreed No. for destructive and non-destructive tests (must meet acceptance limits)

Pubblicazioni

Mechanical and Microstructural Assessment of Inhomogeneities in Oxide Ceramic Matrix Composites Detected by Air-Coupled Ultrasound Inspection

Autori: Jan Roßdeutscher, Peter Mechnich, Ferdinand Flucht, Yuan Shi, Raouf Jemmali
Pubblicato in: Journal of Composites Science, Numero 5/11, 2021, Pagina/e 286, ISSN 2504-477X
Editore: MDPI
DOI: 10.3390/jcs5110286

Effect of coupon geometry and preload on flexural properties of oxide ceramic matrix composites

Autori: Tobias Lehnert, Yuan Shi, Daniel Cepli, Raouf Jemmali, Thomas Wamser, Andreas Lauer, Jan Roßdeutscher, Britta Panthen
Pubblicato in: International Journal of Applied Ceramic Technology, Numero Volume 20, Numero 1 January/February 2023, 2023, ISSN 1744-7402
Editore: John Wiley & Sons, Ltd
DOI: 10.1111/ijac.14307

Risultati finali

Pubblicazioni

Condividi questa pagina

Scarica